Philips DVD795SA owner manual Connecting to a TV and a Cable Box or Satellite Receiver

Page 16

16 Hookups (cont’d)

Connecting to a TV and a Cable Box or Satellite Receiver

2

ANT IN

TO TV

VIDEO

AUDIO

IN

 

 

IN

R

L

CH3 CH4

Satellite or Cable TV Signal

ANTENNA IN

 

RF IN

 

Back of Cable Box

LEFT AUDIO IN

or Satellite Receiver

 

 

(example only)

 

RIGHT AUDIO IN

 

 

VIDEO IN

13

4

Back of DVD Player

Back of DVD Player

5

(lower left corner)

 

If you want to connect other equipment to the TV and DVD Player, make sure the DVD Player is still connected directly to the TV. The Player does not have any Video or Audio In jacks to receive video/audio from other equipment.

1 Connect the Cable TV or Satellite signal to the ANTENNA IN or TV IN jack on the Cable Box/Satellite Receiver. The ANTENNA IN jack may be labelled differently among dif- ferent brands. Refer to the instructions provided with your Cable Box/Satellite Receiver.

2 Connect an RF coaxial cable to the ANTENNA OUT or OUT TO TV jack on the Cable Box/Satellite Receiver. Connect the other end of the coaxial cable to the ANTENNA IN or RF IN or 75 ohm jack on your TV. These jacks are labelled differently among TV brands. Check your TV owner’s manual for details.

3 To connect the DVD Player to the TV, connect the supplied video cable (which has yellow ends) to the Player’s yellow CVBS VIDEO OUT jack. Connect the other end of the cable to the VIDEO IN jack on the TV. The VIDEO IN jack is usually yellow and might be labelled VIDEO, CVBS, COMPOSITE, or BASEBAND.

4 Connect the supplied audio cables (which have red and white ends) to the RIGHT FRONT (red) and LEFT FRONT (white) MULTICHANNEL AUDIO OUT jacks on the rear of the Player.

Connect the other ends of the audio cables to the AUDIO IN jacks on theTV. Audio jacks usually are red (right) and white (left). Match the cable colors to the jack colors.

5 Set the Progressive/Interlace switch on the rear of the Player to Interlace.

6 Connect the power cords of the Player, Cable Box/Satellite Receiver, and TV to a power outlet. Turn on all the equipment. (Press STANDBY-ON y on the front of the Player to turn on the Player.)

7 Set the TV to the correct Audio/Video In channel when using the Player. Such chan- nels may be called AUX or AUXILIARY IN, AUDIO/VIDEO or A/V IN, EXT1 or EXT2, etc. These channels often are near channel 00. See your TV manual for details. Or, go to the lowest TV channel and change channels down until you see the Player’s screen saver.

8 Your Cable Box or Satellite Receiver may have a Channel 3/4 switch. Set it to 3 or 4, then set your TV to the same channel. To watch television programming, change TV channels at the Cable Box or Satellite Receiver.

Page 15 Page 17
Image 16
Page 15 Page 17
Contents DVD795SA It to us right now Dear Philips product ownerFor Customer Use Table of Contents Safety Information Safety Information cont’d Introduction Cleaning Discs and the Player Playable DiscsPlayable Discs Region CodesHookups Determining the best possible connectionBefore you begin RememberHookups cont’d Connecting to a TV Only TV has a yellow Video In jack Connecting to a TV Only TV has an S-Video In Jack Back of TV Stereo Connecting to a TV and a Digital Stereo Set the Player’s Digital output. Details are onReceiver Example only Connecting to a TV and a Cable Box or Satellite Receiver Quick Disc Playback ResumeRemote Control Buttons Front Panel AC Power cord Progressive/Interlace switchRear Panel Audio OUT Left/RightSystem Menu Bars System Menu BarOn-Screen Symbols On-screen Symbols, Bit Rate IndicatorBit Rate Indicator Title/Disc Menus Chapter/Track SelectionForward and Reverse Searching Forward and Reverse Searching, Slow MotionSlow Motion Time Search Still Picture/Frame-by-Frame PlaybackPress System Menu Press repeatedly to select Time Search Zoom Zoom, Camera AngleCamera Angle Repeat Repeat, Repeat A-BRepeat A-B Audio Language Audio Language, SubtitlesSubtitles Scan, Shuffle ScanShuffle To return to normal order playback, press ShuffleChanging Your Code Access ControlPress 9 repeatedly to select Change code. Then, press Play Once/Play Always Child LockSetting Parental Levels Access Control cont’dPress 9 repeatedly to select Then press . Access con Access Control contd Changing the CountryFavorite Track Selection Setting a ProgramWhile playback is stopped, press System MENU. Press Audio CD FTS Audio CD36 MP3 Playback Playing MP3 filesSacd Sound Mode Hybrid SacdActivating Playback Control PBC Playback ControlTurning off PBC TV System NTSC/PAL TV System NTSC/PALBlack Level Shift Black Level Shift, Video ShiftVideo Shift TV Shape TV Shape will be selected. PressPicture with black bars at the top and bottom Terbox material. The DVD case may say the DVD isColor Settings Smart Picture Clearly while keeping down the overall volumeClear Voice Press 9 repeatedly to select Clear Voice, then pressDigital Output, PCM Output Digital OutputPCM Output Press 8 or 9 to select Off, PCM only, or All. Press OKPress 9 to select Analog output, then press . Analog out Analog OutputDolby Surround, or if you connected the Player to a TV only Speakers You connected a subwoofer n or not cCD Upsampling CD Upsampling, IntelliPlayIntelliPlay Wake-up Timer Wake-up Timer, Night ModeNight Mode Karaoke Vocal Karaoke Vocal, LanguageLanguage Smart Power-off, Beeper Smart Power-offPress 9 repeatedly to select Smart Power-off. Press Press 8 or 9 to choose Enabled or Disabled, then pressStatus Window Status Window, Help TextHelp Text Specifications GlossaryHelpful Hints Player does not respond to the remote control Buttons on the Player or remote control do not workHelpful Hints contd Disc will not playLimited Warranty Philips, P.O. Box 520890, Miami, FL 33152 402To obtain a replacement product from Philips Limited Warranty cont’dExchange Fee + Sales Tax = Total Information Index
Top Page Image Contents