Philips DVP5120K/55 manual Digital Output, Off, Pcm, Night Mode, Down Sampling

English

Setup Menu Options (continued)

Audio Menu (underlined options are the factory default settings)

	This setting is only required if you have connected the audio
Digital Output
	output of this unit to an amplifier/receiver using the digital
	output jack.
	{ Off }	–	Disable digital audio output. Select this if
			you are using the analog audio jacks to
	{ PCM }		connect this unit to a TV or Stereo system.
		–	The connected device does not support
			multi-channel formats. All audio signals are
	{ ALL }		downmixed to PCM format (2-channel).
		–	The connected device supports multi-
			channel audio formats. The digital audio
			format will be output as on disc.
	This mode optimizes playback of sound at low volume. High
Night Mode
	volume outputs will be softened and low volume outputs will be
	enhanced to an audible level. This feature is only applicable for
	DVD video discs with Dolby Digital mode.
	{ Off }	–	Turn off night mode. Select this to enjoy the
	{ On }		surround sound with its full dynamic range.
		–	Turn on night mode.
	This feature enables you to disable digital signal processing for
Down Sampling
	better sound quality.
	{ Off }	–	Play disc recorded at sampling rate of 96
			kHz. This rate can only be achieved in
	{ On }		Stereo-Classic (Flat) mode.
		–	Play disc recorded at sampling rate of
			48 kHz.

32

dvp5120k_55_eng1.indd 32 2008-04-21 10:23:12 AM