Troubleshooting (continued)
Problem
No sound or distorted sound.
The remote control does not function properly.
The unit does not start playback.
The buttons on the unit do not work.
The aspect ratio of the screen cannot be changed even though you have set the TV display.
Solution
–Check the audio connections to the connected audio device.
–Make sure that the connected audio device is turned on to the correct input source.
–Set the digital output setting correctly, based on the device you connected to this unit. See ‘Audio Menu - Digital Output’ for details.
–Aim the remote control directly at the sensor on the front of this unit (not towards the TV).
–Remove any obstacles between this unit and the remote control.
–Batteries are weak, replace the batteries.
–Check the polarities of the batteries are as indicated on the remote control (± signs).
–Load a readable disc with the playback side facing inwards. The
–Make sure the disc is not scratched or warped. Check if the disc is defective by trying another disc.
–The disc is of a different region code.
–You may need to enter the password in order to unlock the disc for playback.
–Moisture may have condensed inside this unit. Remove the disc and leave this unit turned on for about an hour.
–There is a technical problem. Disconnect this unit from the power outlet for 10 seconds and reconnect again.
–The aspect ratio is fixed on the DVD disc.
–Depending on the TV, it may not be possible to change the aspect ratio.
English
37
dvp5120k_55_eng1.indd 37 |