Philips DVP5120K/55 manual Parental Control Set Password

Setup Menu Options (continued)

Rating Menu (underlined options are the factory default settings)

English

Parental Control

Set Password

This setting allows you to control the playback of certain disc through a rating level. It works only on the DVDs with parental level assigned to the complete disc or to certain scenes on the disc.

1)Use the numeric keypad 0-9on the remote control to enter your four-digit password and press OK.

2)Use  keys to select a rating level from 1 to 8 and press OK.

Notes:

–The ratings are country-dependent (‘1’ is considered material that is least offensive and ‘8’ is most offensive). To disable parental controls and allow all discs to play, select ‘8’.

–Some DVDs are not encoded with a rating though the movie rating may be printed on the disc cover. The rating level feature does not prohibit playback of such discs. VCD, SVCD and CD have no level indication, so parental control has no effect on these type of discs.

–DVDs that are rated higher than the level you selected will not be played unless you enter the same four-digit password.

The password is used for Parental Control. The default password is ‘0000’.

To change the password:

1)Use  keys to select { Set Password } and press OK.

2)Use the numeric keypad 0-9on the remote control to enter your existing four-digit password at { Password }.

Note: When doing this for the first time or if you forget your existing password, enter ‘0000’.

3)Press OK to proceed.

4)Enter the new four-digit password at { New Password }.

5)Press OK to confirm and press SETUP to exit the menu.

33

dvp5120k_55_eng1.indd 33 2008-04-21 10:23:20 AM