Philips DVP5120K/55 manual Troubleshooting, Problem Solution

English

Troubleshooting

WARNING

Under no circumstances should you try to repair this unit yourself, as this invalidates the warranty. Do not open this unit as there is a risk of electric shock.

If a fault occurs, first check the points listed below before taking this unit for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help.

Problem		Solution
No power.	–	Press STANDBY-ON on the unit to turn on the
		power.
	–	Ensure that the AC outlet has power.
	–	Disconnect the power cord from the power outlet
		for a few minutes. Reconnect the power cord and try
		to operate again as usual.
No picture.	–	Refer to your TV manual for correct Video In channel
		selection. Change the TV channel until you see the
		DVD screen.
	–	If this happens when you turn on the progressive scan
		feature, wait for 15 seconds for the auto recovery or
		switch back to the default mode as below:
		1) Press ç  to open the disc tray.
		2) Press numeric keypad ‘1’ on the remote control.
	–	If this happens after you set the color system, wait for
		15 seconds for the auto recovery or switch back to
		the default TV color system:
		1) Press ç  to open the disc tray.
		2) Press numeric keypad ‘3’ on the remote control.
Completely distorted picture	–	Check the video connection.
or black/white picture.	–	Ensure that the disc is compatible with this unit.
	–	Sometimes a small amount of picture distortion may
		appear. This is not a malfunction.
	–	The disc is dirty. Clean the disc.

36

dvp5120k_55_eng1.indd 36 2008-04-21 10:23:29 AM