HCD-PX333
CD SECTION
CD AGING MODE
Procedure:
1.Press the ?/1 button to turn the power on.
2.Press the [FUNCTION] button to set the CD function, and press the Z (CD) button to insert a disc.
3.Press three buttons of x (CD) ,
4.The set displays “AGING SEL=00”. Between it is displayed, press the Z (CD) button to start CD aging mode.
5.The sequence during the CD aging mode is following as below.
Note: If the triple button pressing failed to activate the CD test mode, press the [.m
CD aging mode sequence:
CD disk tray open
CD disc tray close
TOC read
Playback track 1
Playback last track
Display aging number
6. To release from this mode, press the
?/1
button to turn the power off.
Note: Refer to “Error History Display Mode” (page 5) for display at an error occurred.
14