Sony HCD-PX333 specifications Adjustment flow, Yes

HCD-PX333

Adjustment flow

Start

Replace IC195

NO

YES

• Abbreviation

OP: optical pick-up

After turning off and then on the power, initialize the EEPROM

For details, refer to “WHEN MEMORY NG IS DIS- PLAYED” in 1. SERVICING NOTES (See page 10)

Replace OP or IC195

YES

7.INITIAL SETTING OF ADJUSTMENT VALUE (See page 43)

NO

Replace IC101, IC195, or D101

NO

YES

9.TEMPERATURE COMPENSATION OFFSET ADJUSTMENT (See page 43)

Replace OP, IC190, or IC195

YES

10. LASER POWER ADJUSTMENT (See page 43)

NO

Replace OP, IC102, IC190,	YES	11. Iop NV SAVE (See page 44)
or IC195
NO

		YES	12. TRAVERSE ADJUSTMENT (See page 44)
Replace OP, IC101, IC151,			13. FOCUS BIAS ADJUSTMENT (See page 45)
	or IC195		16. AUTO GAIN CONTROL OUTPUT LEVEL
			ADJUSTMENT (See page 46)
	NO
			“op change” in SELF-DIAGNOSIS FUNCTION
		YES	(ITEMS OF ERROR HISTORY MODE ITEMS
	Replace OP		AND CONTENTS) (See page 3)
			8. RECORDING AND DISPLAYING THE IOP
	NO		INFORMATION (See page 43)
		YES	“spdl change” in SELF-DIAGNOSIS FUNCTION
Replace the spindle motor			(ITEMS OF ERROR HISTORY MODE ITEMS
			AND CONTENTS) (See page 3)
	NO
	6-4. Auto Check
	(See page 41)
	End adjustments

38