Philips DCR 2020 user manual Receiver wake up, Channel selection, Using P+/P- or number keys

This section describes the basic functions available while watching digital TV or listening to digital radio. For general menu navigation, see Settings.

Receiver wake up

Your receiver is in “low power”.The only way to wake it up is to press on the front panel.

Your receiver is in standby. Press P+, P-, or any number key of the remote control. Alternatively, press y or t on the front panel.

Your receiver, as any electronic equipment, consumes power. In order to reduce power consumption, please switch your receiver to standby whenever you are not using it.

For maximum energy saving we recommend you switch off the receiver by unplugging it from the mains if you are not using it for a long time.

Channel selection

Using P+/P- or number keys

To change channels, use P+/P- or the number keys of the remote control.

Previous Channel Recall

Press BACK to move to the previous channel you watched in the current channel list.

Using the channel list

To view the list of all available channels while watching digital TV or listening to digital radio, press OK.

If you press BACK, the channel list disappears.

51