Philips DCR 2020 user manual User preferences, Languages, On-screen display, Access Control

	Changing PIN code:
	- Scroll to Changing PIN code, and then press OK.
	-	Enter your current PIN code and press OK.
EN	-	Enter your new PIN code and press OK.
	-	Enter your new PIN code again and press OK.
	Once you have changed your Pin Code, keep it secret
	to prevent others from using it. If you forget or lose
	your Pin Code, call your customer service adviser.
	User preferences
	User preferences is used to
		•	Set the language and on screen display options
		•	according to your preferences
			Enable and set up Parental control

Languages

- Set values for the following:

• Menu Language, Audio Language, and

• Subtitles Language:Translation, Hearing impaired, or

SubtitlesOff Mode

- Press OK.

On-screen display

- Set values for the following:

• Banner timeout: banner display duration, from 3 to 10 seconds in steps of 1 second

• Volume bar display:Yes or No

• Volume bar timeout: volume bar display duration, from 3 to 10 seconds in steps of 1 second

- Press OK.

Access Control
Access control is used to enable and set up parental
control options.To access this screen, you must enter
your PIN code.
-	Set appropriate values for the following:
	•	Parental control: Enabled or Disabled
	•	Receiver lock, Setup menu lo k, and Channel
		lock: select to Yes to enable PIN code protection
	•	in order to prevent undesired use
		Maturity l vel: set a level from 1 to 18 to
		prevent access to programmes which maturity
-		rating is higher
	Press OK.

60