Philips DCR 2020 Slot, make sure you affix the reminder sticker, Side that has no chip, System

4

To avoid incorrect insertion of the smart card in the

slot, make sure you affix the reminder sticker

supplied with your receiver on the smart card so as

to cover the following text:“Deze zijde boven” (on

EN

the side that has no chip).

5

Insert your smart card in your receiver with the

golden or silver contacts facing up.

6

Insert the two batteries supplied in your remote

control.

Batteries are removable from the remote using

common household tools (like a screwdriver,…).

The batteries supplied do not contain hazardous

substances such as Mercury, Cadmium, or Lead.

However, they must not be disposed of with your

household waste but to a local separate collection

system.

7

Reconnect your TV set and recorder to the mains.

Do not connect your receiver yet!

8

Switch on your TV set and select a channel.

9

Plug the receiver’s power cord to the mains.The

welcome screen appears, then the First installation

screen.

10

Set your favourite menu language and press OK.

11

Set appropriate values for the following:

•

Network ID: applicable network ID as indicated

by your operator. Please see operator booklet for

the right decimal value to be entered for your

•

region.

Frequency: broadcast frequency predefined or

entered manually as indicated by your operator

•

(please see operator booklet).

Sy

bol Rate: predefined value, which should not

•

be modified unless requested by your operator

M

dulation: predefined modulation type, which

should not be modified unless requested by your

operator

Symbol rate and modulation may be modified

manually upon request by your operator.

12

Press OK to start scanning for channels.