| programme you want to record is broadcast using |
|
- | the t or y key, and press OK to select it. |
|
Press OK to confirm. | EN | |
When a recording timer is active, you cannot change | ||
digital channels, but you can switch to analogue TV using | ||
the TV/STB key and zap through analogue channels. | ||
To delete an active timer, press the key sequence |
| |
TIMER, 0. |
| |
Modify an existing timer before its activation: |
| |
- | Select Modify timer from list from the Recording |
|
| timers or Reminders sub menu depending on the type |
|
- | of timer you want to modify. |
|
Select the timer you want to modify from the list. |
| |
- | Modify the appropriate settings. |
|
- | Press OK to confirm. |
|
Delete an existing timer:
- Select Delete timer from list from the Recording timers or Reminders sub menu depending on the type of timer you want to delete.
- Scroll to the timer you want to delete from the list. - Press OK to confirm.
Sleep timer
You can set a sleep timer to automatically switch your receiver to Standby mode after a given time lapse.
Set a sleep timer: | |
- | Select the time lapse after which the receiver should |
- | go to Standby (up to 3 hours) using the u or i key. |
Press OK to confirm. | |
Disable a sleep timer: | |
- | Select OFF instead of a time lapse. |
- | Press OK to confirm. |
Conditional access
Conditional access is used to view information on your receiver and smart card, including the receiver and smart card version. It is also used to change your receiver PIN code.
The PIN code default value is 0000.
59