Philips DCR 2020 Setting a timer from the Timers sub Menu, Deleting an active timer, Press Timer

EN

Setting a timer while watching digital

TV or listening to digital radio

- Press TIMER.

- Set the desired Timer type: Recording timers, Reminders, or Sleep Timer, and then press OK.

- Set the values of the recording parameters using the arrow or number keys as appropriate (for more details, refer to paragraph Recording timers and Reminders).

- Press OK to confirm.

Setting a timer from the Timers sub

menu

- Select the Recording timers item from the Timer sub menu.

- Select Add timer.

- Set the values of the recording parameters using the arrow or number keys as appropriate (for more details, refer to paragraph Recording timers and Reminders).

- Press OK to confirm.

Deleting an active timer

A timer is active. Recording is signalled by two front LEDs: the right hand one lit in red and the left hand one lit in green in TV mode or in orange in Radio mode, or both LEDs lit in red if your receiver is in standby.

To delete the active timer:

- If your receiver is in standby, press P+, P-, or any number key of the remote control.

- Press the key sequence TIMER then 0.The red light then switches off and you can change channels.

When a recording timer is active, you cannot change digital channels, but you can switch to analogue TV using the TV/STB key and zap through analogue channels.

54