Philips DCR 2020 More about recording, VCR or DVD control, Connection for Easy Recording

	More about recording
EN	(VCR or DVD control)
	Connection for Easy Recording
	This connection allows automatic recording without requiring you to program your
	VCR or DVD recorder.You must, however, set a timer on your receiver as described
	in paragraph Timers.
	Prior to choosing this connection method:
	• Consult the user manual of your VCR or DVD recorder to check if and how
	this feature is supported. Most Philips VCR and DVD recorders support one of
	the two Easy Recording options.
	• Check that your TV and VCR or DVD are both fitted with two SCART sockets.
	• Incorporate your receiver in your existing installation as shown below:

		TV set
Cable Wall socket	PHILIPS
	EXT 1	EXT 2

to AC outlet

Cable Receiver

VCR/DVD

IN FROM ANT	EXT 1
OUT TO ANT	EXT 2

For optimum configuration

-Screw the adapter supplied with your receiver on the “RF IN” socket of the rear panel.

-Connect the receiver “RF IN” socket (with adapter) to the cable wall socket.

-Connect the “RF OUT” socket of your digital receiver to the aerial input socket of your VCR or DVD using the antenna cord type F-IEC.

-Connect the “RF OUT” socket of your VCR or DVD to the aerial input socket of your TV using a RF coaxial lead.

64