16SRM7500 - Instructions for Use
When you want to exit the Setup menu and go:
■Directly to your playlists, press 
on the remote.
■To your last selected device, press 
on the remote.
Add a Device
To be able to operate your devices with your SRM7500, you have to add these devices to the remote control.You can add up to 6 devices from the list of available devices.
You cannot add a device twice. Once you have added a device to your remote control, it disappears from the list. However, the list of devices contains
1Select the option Add a device in the Setup menu by using the cursor keys and press 
.
Note If you already added 6 devices on the remote, apart from your PC Media Center, you will be asked to delete a device.
Refer to page 17 on how to delete a device.
2Select the device and brand you want to add and press 
. The remote will search for available codes for the brand.
3Follow the onscreen instructions to test the codes.
■When a working code set is found, your device is correctly installed.
■When no working code is found,
■You can perform a full database search to find a correct code set.
This means that the remote will send out all codes available in the database until a working code is found. Keep in mind that it can take up to 25 minutes to scan the entire database.
■You can learn the codes from the original remote of the device. Refer to chapter ‘Fix a Key’ on page 17 for more information on how to learn codes.
When the device is installed, the following screen appears.
© 2007 - Philips Innovative Applications, Interleuvenlaan | SRM7500 - Instructions for Use |