4SRM7500 - Instructions for Use
Installing the Remote Control
The initial installation of your remote is divided into 2 main parts:
•Preparing the PC you want to control with the SRM7500 by installing the MediaControl software and the USB transceiver, enclosed.
•Configuring the remote control to set up the connection to the correct PC and define the devices the SRM7500 will work with.
Preparing Your PC
Warning It is very important to follow the specified sequence of actions during the installation.
First you need to install the software.This software controls the connection of the SRM7500 to the host PC and will allow you to use the features of your media player. Only then you can insert the USB transceiver.
1Insert the installation CD enclosed.
An installation wizard appears on your PC screen.
2Install the MediaControl software by following the onscreen
instructions.
When the software is installed, the MediaControl icon 
appears in the taskbar on your PC screen.
3When requested in the installation wizard, insert the USB transceiver in the dedicated port on your PC. The USB transceiver will be recognized and installed automatically.
When the USB transceiver is correctly installed, the
MediaControl icon turns orange: 
.
4After the USB transceiver is installed, insert the batteries in the remote control, as shown.
© 2007 - Philips Innovative Applications, Interleuvenlaan | SRM7500 - Instructions for Use |