SRM7500 - Instructions for Use | 27 |
|
|
Problem |
| Cause |
|
| Solution | |||
The No Connection | The USB transceiver | When the MediaControl icon | ||||||
icon |
| blinks in | is disconnected. |
|
| in the taskbar is red, the USB | ||
| ||||||||
|
|
|
|
|
|
| transceiver is disconnected from | |
the upper |
|
| ||||||
corner of the screen. |
|
| the PC. | |||||
|
|
|
|
| ||||
|
|
|
|
|
| Remove the USB transceiver from | ||
|
|
|
|
|
| your PC, wait a few seconds and | ||
|
|
|
|
|
| insert it again.The icon should | ||
|
|
|
|
|
| change color. | ||
|
|
|
|
|
| |||
|
|
|
| Another radiant | Turn off the devices placed in the | |||
|
|
|
| device, e.g. a | neighborhoud of the PC that | |||
|
|
|
| microwave oven, is | could cause the interference and | |||
|
|
|
| placed near the PC | try connecting again. | |||
|
|
|
| and interferes with |
|
|
| |
|
|
|
| the signals of the |
|
|
| |
|
|
|
| remote. |
|
|
|
The connection to the remote on your PC may be lost because you formatted your PC or uninstalled the driver.
Renew the connection to the remote.
1Prepare your PC by installing the software and USB transceiver again. Refer to chapter ‘Preparing Your PC’ on page 4.
2Reconnect the remote to the PC. Refer to chapter ‘Reconnect to PC’ on page 19.
One or more keys | The specific function | Keep in mind that SRM7500 has |
are not working | is not available on | only hard keys.This means that |
correctly. | the original remote | only the hard keys on SRM7500 |
| control. | that have a function in the device |
|
| will work. |
|
|
|
| The code behind the | You can fix keys from your |
| key is defect. | original remote control. Refer to |
|
| chapter ‘Fix a Key’ on page 17. |
|
|
|
| Some keys have | Refer to chapter ‘Device specific |
| device specific | keys’ on page 12 for more |
| functions. | information. |
|
|
|
© 2007 - Philips Innovative Applications, Interleuvenlaan | SRM7500 - Instructions for Use |