22 SRM7500 Instructions for Use, Copy Volume

22SRM7500 - Instructions for Use

Change Display Time Out

To save power, your SRM7500 will switch off when it is not used for a while.This is the display time out.You can change this time out to one of the following:

■Short

■Medium

■Long

1Select the option Display time out in the Setup menu by using the cursor keys and press .

2Select the preferred display time out and press .

The time out is changed for your remote control.The Setup menu appears on the screen.

Note The display time out has an impact on the lifetime of the batteries, the longer the backlight stays on, the faster the batteries will be drained.

Copy Volume

After adding devices, the SRM7500 automatically copies the Volume keys and Mute key, as follows:

■Video devices, like DVD, DVDR,VCR and Satellite box, use the Volume keys of the TV (provided that you have programmed a TV).

■Audio devices, like CD, DMR and Tuner, use the Volume keys of the Amplifier or Receiver (provided that you have programmed an Amplifier or Receiver).

Note By default your PC uses the Volume settings of Microsoft Windows. These Volume keys cannot be copied to another device.You can, however, copy the Volume keys of another device, e.g. amplifier, to the PC.

When no TV or amplifier are installed, the Volume keys will not send codes.When the source device is added later on, the Volume keys will be automatically updated.

You can change which Volume keys are used, for instance when you want to use the Volume keys of the Amplifier for the DVD.

1Select the option Copy volume in the Setup menu by using the cursor keys and press .

2Select the device you want to copy the Volume keys from (e.g.TV or AMP or RECEIVER) and press .

SRM7500 - Instructions for Use