Philips manual 26 SRM7500 Instructions for Use, Enjoying Your SRM7500, Wizard, No Connection

Page 26

26SRM7500 - Instructions for Use

Problem Cause Solution

I want to quit the installation

wizard.

To quit the installation wizard you

press or once.

■When you did not yet install a connection to the PC, the remote will restart the wizard on your SRM7500.

■When you installed the connection to the PC already, the remote will turn into the music controller.To install a device, you need to add each device individually like described in chapter ‘Add a Device’ on page 16.

Enjoying Your SRM7500

	Problem				Cause
	The No Connection				The SRM7500 is too
	icon		blinks in		far from the PC to
	icon		blinks in		far from the PC to
					set up a connection.
	the upper right-hand				set up a connection.
	the upper right-hand

corner of the screen.

Solution

The SRM7500 should be maximum 33 ft (10 m) from the PC. Obstructions in the path from the remote to the PC can reduce this distance.

The PC is not	Turn on your PC.
powered.

The PC is in standby mode.

It can take a while for the PC to start up after standby mode. During start-up, you will see the No Connection icon blinking on the remote.

The MediaControl software is disabled.

Check the icon in the taskbar.

When the icon is blue, the software is disabled.

To enable the software, right-click the icon in the taskbar and select Enable.The icon will turn

green .

© 2007 - Philips Innovative Applications, Interleuvenlaan 74-76, 3001 Leuven (Belgium)

SRM7500 - Instructions for Use

Image 26

Contents SRM7500 Contents Taking a first lookMusic key See p Power key Battery low icon No connection icon Sending animationInstalling the Remote Control Preparing Your PCConfiguring the Remote Control When no working code is found Replacing the batteriesEnjoying Your Remote Control Using SRM7500 as a music controllerPrevious screen Browsing and playing musicPress Return to Press to return to the playlistsDefining the Playback Settings 10 SRM7500 Instructions for Use Creating a queueUsing SRM7500 as a universal remote control Selecting a DeviceEnter 169 Home 12 SRM7500 Instructions for UseClear Text off Help Enter Color key Front Centre Rear TestSelecting Extra Functions Opening Your PC Media Center14 SRM7500 Instructions for Use Starting Up an ActivityAdvanced features of SRM7500 16 SRM7500 Instructions for Use Add a DeviceDelete a Device Fix a Key18 SRM7500 Instructions for Use 2 inchReconnect to PC Add a functionShow details 20 SRM7500 Instructions for Use Add an ActivityDelete an Activity Change LanguageChange Display Time Out Copy Volume22 SRM7500 Instructions for Use Full Reset Support TroubleshootingConfiguring the SRM7500 24 SRM7500 Instructions for UseYou can learn the keys from Wizard 26 SRM7500 Instructions for UseEnjoying Your SRM7500 No ConnectionYour PC, wait a few seconds Transceiver is disconnected fromUpper right-hand Corner of the screen Insert it again.The icon shouldVideo devices, like DVD Volume keys28 SRM7500 Instructions for Use Amplifier or ReceiverNeed Help? Advanced featuresWant to add a PC after initial installation Prepare the new PC as described in ‘Preparing Your PC’ onHelp Center Helpline Service Website & Helpline30 SRM7500 Instructions for Use FCC Compliancy IFU Approbation/Safety Content SRM7500CE Regulations According to R&TTE Declaration of Conformity32 SRM7500 Instructions for Use Only for Europe- Weee Regulation