SRM7500 - Instructions for Use | 5 | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Press the cover inwards and lift it up.
Place the 3 batteries into the battery compartment.
Position the cover and press firmly until you hear a click.
The remote initializes and is now ready to be configured as described below.
Note Leave your PC turned on during the configuration of the remote control. You still need to set up the connection between the remote and the PC.
Configuring the Remote Control
A wizard on the remote’s screen will guide you through the different steps of the initial configuration of your SRM7500.
1Select the language for your instructions on the remote using the cursor keys and press 
.
2Select Next and press 
. Make sure the remote is within a range of 6 feet (2 meters) of the PC.
When the connection between the remote and the PC is installed successfully, a confirmation message appears on the SRM7500 screen
and the MediaControl icon in the taskbar on your PC screen turns green: 
.
The name of the PC you want to control with your SRM7500 appears.
3Confirm that you want to add other devices, like your TV or DVD
player, by selecting Yes and press 
.
In doing so, you replace their original remote control with SRM7500. The installation of 4 devices typically takes up to 20 minutes.
4Select the device and brand of the device you want to add using the
cursor keys and press 
.
The remote searches the database for available code sets.
© 2007 - Philips Innovative Applications, Interleuvenlaan | SRM7500 - Instructions for Use |