Philips 60P 8341, 64P8341 Connect two RF coaxial cables to, Cable to the INput on the cable box

Page 54

General Information • Using Connection Options

USING CONNECTION OPTIONS

Cable Box • VCR • DVD

The example presented here includes the connection of a DVD

or other accessory device to the Component Video inputs (labeled Y, Pb, Pr) on the back of the TV. Component Video provides you with the best possible color and picture resolution.

NOTE: The Component Video inputs signal is viewable only on the main screen, not in the PIP window.

BEGIN

Connect a cable TV signal to a

two-way signal splitter.

Connect two RF coaxial cables to

the two-way signal splitter.

Connect one of the RF coaxial

cables you just hooked up to the two- way splitter to the PIP ANT(enna) “B” input on the back of the TV.

Connect the other RF coaxial

cable to the IN(put) on the cable box.

Use another RF coaxial cable to

connect the OUT(put) on the cable box to the ANTENNA IN(put) on a VCR.

Use another RF coaxial cable to connect the ANTENNA OUT(put) on the VCR to the ANT(enna) “A” input

 

Back of TV

 

 

 

 

 

3

PIP ANT "B" 75Ω

NOTE: The signal routed to the TV’s PIP

 

ANT(enna) “B” input jack will allow for

 

 

 

 

the selection and viewing of cable channels

 

 

at the TV (except for scrambled premi-

 

 

um/movie channels). Press the SOURCE

 

 

button on the remote to select TUNER-B,

 

 

then press the PIP CH(annel) DN/UP but-

 

 

tons to choose channels.

 

 

ANT "A" 75‰

6

AV1 IN

AV2 IN

7

 

 

VIDEO

 

 

 

 

 

 

 

Y

 

 

 

 

 

MONO/L

 

 

S-VIDEO

 

 

 

 

 

V

 

 

 

 

 

 

 

 

 

AUDIO

Pb

 

 

 

 

 

R

 

 

 

 

 

 

 

Pr

 

 

 

 

 

8

 

 

9

 

 

 

 

 

 

 

 

 

COMP VIDEO

S-VIDEO

VIDEO

AUDIO

 

 

Y

Pb

 

 

R

DVD or Other

 

 

 

OUT

OUT

OUT

 

 

Pr

 

 

L

Accessory Device

OUT

OUT

 

ANTENNA

 

 

OUT

 

 

VIDEO

L AUDIO R

 

ANTENNA

 

 

IN

 

 

IN

IN

VCR

 

 

 

5

 

OUT

 

 

IN

 

 

on the back of the TV.

Use a video cable to connect the VIDEO OUT(put) on the VCR to the AV2 IN(put) for VIDEO on the back of the TV. Also use audio cables to connect the AUDIO OUT(puts) L(eft) and R(ight) from the VCR to the AV2 IN(puts) for AUDIO on the back of the TV.

Use component video cables to

4

Cable Box

 

 

1

Two-way

 

Signal

 

Splitter

 

2

Cable TV

Company

NOTES:

•The signal routed to the TV’s ANT(enna) “A” input will allow premium/movie channels to be viewable on the TV.

•You must select channels at the cable box.

•You must set your TV channel to the same output channel (usually CH 3 or 4) as the cable box before it is possible to use the cable box to change channels on the TV.

connect the Component Video outputs (Y, Pb, Pr) on the back of the DVD to the Component Video inputs on the back of the TV.

Use audio cables to connect the AUDIO OUT(puts) L(eft) and R(ight) on the back of the DVD to the AV1 IN(puts) for AUDIO on the back of the TV.

SMART HELP

See page 43 for details on how to select the signal

sources you have connected.

If you need accessories or parts to complete the described connections, contact your dealer, or our Parts Information Center at

1-800-851-8885.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Projection Television Warranty Verification Important Safety Instructions Table of Contents Features Digital-Ready Projection TVAdjusting the Picture Screen menuPress the Cursor Ring Right Press the MENU/SELECT but Press the Cursor Ring Right or Left to switch DNR onTurning on the Dynamic Noise Reduction DNR Control Press the STATUS/EXIT buttonTurning on the Imagemax Control Ton on the remote control to show the on-screen menuRight or LEFTto switch between on and OFF Press the Cursor RingConverge RED/BLUE Right to enter Navigate mode Converge Multipoint RED/BLUEDown repeatedly until MULTI- Point RED is selected Multipoint RED Press the MENU/SELECT but Ton to return to the ConvergenceMenu Save MultipointUndo Multipoint Down repeatedly until Undo Multipoint is selectedUndo Multipoint Setting the Clock Press the MENU/SELECT buttonPress the Cursor Ring Down Right again to highlight the time indicator area Setting the Start TimeRight to enter the Features menu Down twice to highlight FEASetting the Stop Time Highlight the Stop Time controlRight to highlight the time indica- tor area Press the Number buttons to Selecting the ChannelPress the Cursor Ring RIGHT. Then press the Cursor Enter the desired start-up channel. OrTuner Mode Selecting the TunerONCE, press the Cursor Ring Setting the Activate ControlPress the Cursor Ring Right again. Then press the CUR Cursor Ring Right againRight or Left to turn the Timer Display on or OFF Constantly Displaying the Time on ScreenUnderstanding Autolock Movie RatingsEnter a new four-digit code Setting UP the Access CodePress the Cursor Ring Right to highlight Access Enter your new four-digit codeEnter your four-digit Access Blocking ChannelsPress the Cursor Ring UP or Blocking by Movie Rating Right again to highlight AccessEnter your four-digit Access CODE. Correct will flash very Down repeatedly until Movie Rating is highlightedBlocking by TV Rating ING is highlightedRight to enter the TV Rating menu Enter your four-digit Access Code Press the Cursor Ring Turning the Blocking Control on or OFFBlocking Unrated Broadcasts Right to enter the Block Options menuDown once to select Block Down twice to highlight no RAT- ING Right again to highlight Access Code input areaBlocking Broadcasts That have no Rating Press the Cursor Ring Right or Left to turn no RATSTATUS/EXIT button to remove Reviewing Your SettingsPress the STATUS/EXIT but Them from the screenClearing ALL Blocked Channels Right again to highlightDown repeatedly until the Closed CAP control is highlighted Using the Closed Captioning ControlDown to select a Caption Mode SOR Ring Right again to highAdjusting the TREBLE, BASS, and Balance Then Press the Cursor Ring Right or Left to adjustTrol, press the Cursor Ring Using the AVL Audio Volume Leveler Control Down repeatedly until AVL is highOn or OFF Using Incredible Surround MonoSound Setting the TV for Stereo and SAPDown once to highlight Sound menu TreblePress the Cursor Ring Left Setting the Audio OUT ControlDown repeatedly until Audio OUT is highlighted Or Right to set the Audio OUT to Variable or FixedUsing the TV Speaker Control and Audio Outputs To hear the TV sound from only the audio system speakersTon to remove the menu from the screen Using the Bass Boost Control Using Autopicture Press the Picture button onPress the Picture button AutoSound setting will appear in the middle of the screen Using AutosoundPress the Sound button on the remote control. The current AutoSound ChoicesUsing SURF, Alternate CHANNEL, and Program List SurfUsing the Sleep Timer Control Sleep OFFSleep Tons to adjust the TV’s sound level Using the Volume ButtonsPress the VOLume +,- but VolumeUsing the AV Button CV1 TUNER-B TUNER-ASetting the TV Remote to Work Accessory Devices Desired accessory device and press the Power buttonDoes the remote turn the accessory device on? Please read through all the steps before beginning Search Method Ry device and continue holding the buttons downSetting the TV Remote to Work Accessories See the next page for more codesSatellite Receiver Brand Remote Codes Using PIP Basic Connections Cable TV Signal Company RF Coaxial Cable 75 Ohm PIP WindowCan press the PIP CHannel DN/UP Selecting the PIP Signal SourceInput on the back of the TV, you Buttons to change channels in the PIP windowShow the PIP window again Using the PIP Remote Control ButtonsPress the PIP ON/OFF button to To remove PIP from the screenAdjusting the PIP Color and Tint Controls Press the Cursor Ring Right to enter the FeaturesPress the Cursor Ring Down twice to highlight FEA Using Connection Options Connect a cable TV signal to aConnect the other RF coaxial Connect two RF coaxial cables to Cable to the INput on the cable boxUse another RF coaxial cable to Helpful Hints Glossary of Television Terms Index Factory Service Locations CanadaHouston Limited Warranty Projection Television
Top Page Image Contents