5.3Front-panel display messages
Your HD receiver is starting up
Your HD receiver is tuned to TV channel 25.
Your HD receiver displays r025 when it is tuned to radio channel 25.
- rEC is displayed each time you press a button on your remote control to indicate that:
•A recording is in progress
•Your HD receiver is locked on to the programme being recorded
-To unlock your HD receiver, you must stop the recording by pressing EXIT and then OK.
Antenna signal is not available
Subtitle on.
oFF indicates that subtitles are turned off.
Main menu is open
Channel list is open
TV guide is open
Your HD receiver is switching to standby mode
HDMI is the active A/V output (recommended) of your HD receiver
AUX SCART is the active A/V output of your HD receiver
Picture format is 4:3 with black bars – 16:9E indicates that the picture format is 4:3 stretched to 16:9 – 16:9o indicates that the picture format is 4:3 zoomed in to the screen width.
Software update is starting – L0 to L100 indicate that the software is being loaded – S0 to S100 indicate that the software is being loaded – End indicates a successful update – FAiL indicates a failed update.
Automatic resolution adjustment (recommended) – other possible settings are indicated as 576i, 576P, 720P, 180i (for 1080i) and 180P (for 1080p).
Your HD receiver is in the first installation setup
20 | Using more of your HD receiver |