Philips 502-1040510 Retuning your HD receiver, Updating your HD receiver’s software manually

Use / / / to set the time period during which you will be able to watch any unlocked channel without having to enter your PIN code. Press the green button to confirm.

To delete the child timer, make sure Modify child timer is highlighted and press the red button.

To modify the child timer, make sure Modify child timer is highlighted and press or OK. Make the required changes and press the green button to confirm.

To lock a channel, use / to highlight Channel lock, and press or OK.

Use / to highlight the channel you want to lock, and press OK. Press or BACK to return to the previous menu.

To change your PIN code, use / to highlight Change PIN code, and press or OK.

Use the number buttons to first enter your current PIN code and then enter your new PIN code. Use the number buttons to enter your new PIN code again, for confirmation. If you correctly entered the PIN codes, your HD receiver briefly displays a message confirming that your PIN has been changed, and then returns to the Parental Control menu.

Note

Your new PIN code can be any 4-digit number other than the default PIN code (0000).

Press or BACK to return to the Settings menu.

Retuning your HD receiver

From the Settings menu, use / to highlight Set-upand press or OK.

In the Set-upmenu that appears, make sure Channel installation is highlighted and press or OK.

In the Channel Installation menu that appears, make sure Re-tune is highlighted and press or OK.

A progress screen displays to confirm that the search is taking place.

Press the green button to save any new channels and return to the Set-upmenu. Press the red button to cancel the search and return to the Set-upmenu.

Note

The Network messages menu (under the Settings menu) alerts you of any changes to your network such as recently added channels, services, etc.To save time, check this menu before retuning your HD receiver.

Updating your HD receiver’s software manually

You can manually update your HD receiver software using a USB memory stick.

Download the latest software file from the Philips website (www.philips.com/support), unzip it and transfer it to a USB memory stick. Be sure to place the downloaded file in the top-level folder of your USB memory stick.

Connect your USB memory stick to the USB connector on the rear panel of your HD receiver.

From the Settings menu, use / to highlight Set-upand press or OK.

In the Set-upmenu that appears,

use / to highlight Software update and press or OK.

E N G L I S H

Using more of your HD receiver 25