Note
Set Antenna powering to On only if you need to power an
50 mA current consumption. Be sure to read your indoor antenna’s user manual before turning this setting on.
To control antenna output, press 
to highlight Antenna output and press 
or OK. Use 
/ 
to highlight Inactive in eco mode or Always active.
Press 
or BACK 
to save your changes and return to the previous menu.
Note
If Antenna output is set to Inactive in eco mode while Antenna powering is set to On, the device(s) connected to the To TV/VCR output will not receive the antenna signal.
To see information about your HD receiver, press 
and highlight System information. Details such as software version, model number, serial number, etc., are displayed on the right.
Press 
or BACK 
to return to the Settings menu.
6 Maintenance
6.1Cleaning
For cleaning, use a soft, damp (not wet) cloth. Never use any abrasive cloth and aerosol cleaners
6.2Replacing
Your HD receiver does not contain any user- serviceable parts. Do not attempt to open it. All maintenance work must be carried out by qualified service centres.
6.3Disposing
Your HD receiver is designed and manufactured with
Please inform yourself about the local separate collection process for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal household waste.The correct disposal of your old product will help prevent potential negative consequences for the environment and human health.
E N G L I S H
Maintenance | 27 |