Philips 502-1040510, DTR 5520 manual Double Scheduling, Necessary system installation

Page 29

Use a SCART cable (not supplied) to connect the AUX connector on the rear panel of your HD receiver to the SCART input connector of yourVCR or other recording equipment. Connect your HD receiver and other equipment to the mains.

Notes

Double Scheduling

To succeed making recording, do not forget to set timers on your video or DVD recorder according to your HD receiver’s recording schedulings.

How to avoid double scheduling? Your recorder is fitted with a feature allowing its start-stop control compatible* with your HD receiver.

*The recorder function is activated by the video signal at its SCART input. Once the function is active, the recording starts when video is on and stops when video is off.

If your Video or DVD-R recorder supports the above function, the simple scheduling of your HD receiver will automatically control your recorder.

Necessary system installation

•Enable ‘Recorder Control’ on your Video or DVD-R recorder. Refer to the user manual of your recorder.

•Set the Recording link setting of your HD receiver (under Menu > Settings > Preferences > Recording) to ON.

7.3Connecting your standard- definition TV

 

1

Aerial wall

 

socket

HD receiver

4

TV

Mains wall socket

2

SCART

Connect the aerial cable (not supplied) from the aerial wall socket to the Antenna IN connector on the rear panel of your HD receiver.

Use a SCART cable (not supplied) to connect the AUX connector on the rear panel of your HD receiver to the SCART input connector of your standard-definition TV.

Connect your TV to the mains. Use your TV’s remote control to select the SCART input connector, which is connected to your HD receiver, as the the A/V source. If necessary, refer to your TV’s user manual.

Connect your HD receiver to the mains and wait until your HD receiver wakes up (‘InSt’ appears on the front-panel display).

Press the V-Outbutton on the front panel twice.‘AU’ now appears on the front-panel display and the ‘Welcome’ screen appears on your TV. See section 3.3, Installing your HD receiver, on page 10 for instructions on completing the first installation setup from step 3.

Note

Optionally, you can also use the supplied RF cable to connect the RF output connector (labelled To TV/VCR) of your HD receiver to the RF input connector of your TV.

E N G L I S H

Accessories and connections

29

Page 28 Page 30
Image 29
Page 28 Page 30
Contents DTR Page Table of contents Page Safety information Reducing power consumption What’s in the box? Your HD receiverWhat you also need not supplied? Remote controlOverview Front panel Front Panel Rear panel Rear PanelPreparing your remote control How to read this manual?Getting started TipInstalling your HD receiver Connecting your HdtvPress the green button to confirm TV shape menu appears What if no channels are found? Using your HD receiver More about the channel banner content Using the TV guide Using channel listsChanging current channel list Press Guide , Back or Exit to remove the TV guideScheduling/stopping recordings Using TV guideUsing recording timers Press Options , Back or Exit to remove the tools menu Using the Tools menuSettings Options HD receiver Front panel Standby indicator Using more of your HD receiver+ & P- buttonsTo change channel up or down 576p, 1080i or 1080pMenu Front-panel display messages Creating a favourite list Using the Main menuManaging favourite lists Accessing the Settings menu Using the Settings menuRenaming favourite lists Modifying/Editing favourite listsDisplay Setting your preferencesSeconds Language preferencesAutomatic eco mode Default, 16/9 Full Screen or 16/9 ZoomDefault volume Hours, 6 hours, 7 hours or 8 hours Return channelUpdating your HD receiver’s software manually Retuning your HD receiverChanging other system settings Use / to highlight Factory reset and press OK twiceCleaning MaintenanceReplacing DisposingSystem settings Connecting your audio equipmentConnecting your recording equipment Option a Electrical S/PDIF connection DigitalDouble Scheduling Necessary system installationConnecting your standard- definition TV High definition Standard definitionApplication system resources Your remote control is not working Network messages menu from Menu Settings Network messagesPicture seems to be stretched or squashed Your HD receiver needs a software upgrade Glossary USB memory stick IndexSurround DTR 5520/05 Contact informationTrademarks and partner logos Trademarks and partner logos
Top Page Image Contents