Connecting the antenna or unencrypted cable
Be sure your antenna or other device is connected properly before plugging in the AC power cord.
If you connect to an antenna through RF cable
Any DTV programs that are broadcasted in your area can be received for free through an antenna connection.
For 32PFL5708/F7 and 39PFL5708/F7
IN
cable
12 English
Connecting a
Do not place your recorder too close to the screen because some recorders can be susceptible to signals.
For 32PFL5708/F7 and 39PFL5708/F7
IN | RF cable | OUT |
| IN | OUT |
cable |
| Audio L/R + |
OUT | video cable | |
| IN | |
|
| |
IN | OUT |
|
Audio L/R + video cable |
For 40PFL5708/F7, 47PFL5708/F7 and 50PFL5708/F7
RF cable | OUT |
For 40PFL5708/F7, 47PFL5708/F7 and 50PFL5708/F7
IN |
|
| OUT | ||
Audio L/R + video cable |
|
| ||
|
|
| ||
|
| IN | IN |
|
|
|
| Audio L/R | |
cable |
|
|
| |
OUT |
| OUT | + video | |
|
| cable | ||
|
|
| ||
RF cable | OUT | |
|
|
|
cable
IN
RF cable | OUT |
If you connect a set-top box through HDMI
If the TV is connected to a cable box or satellite 
SOURCE.
For 32PFL5708/F7 and 39PFL5708/F7
IN | OUT | RF cable |
| HDMI cable | IN |
|
| |
|
|
For 40PFL5708/F7, 47PFL5708/F7 and 50PFL5708/F7
IN | OUT | RF cable |
| HDMI cable | IN |
|
|
Note
•Only the left loudspeaker reproduces sound for mono equipment. Use a mono to stereo adapter (not supplied) for sound reproduction via all internal loudspeakers.
•If there is no input signal and no operation for 15 minutes, the unit will go into standby mode automatically.
Plugging in the AC power cord
Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are made.
Caution
•Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).
•Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.
Note
•Each time you plug in the AC power cord, no operations will be performed for a few seconds. This is not a malfunction.