Philips 32PFL5708/F7 Setting, You can set the digital audio output format Digital, Output, Format

Analog/Cable TV operation

You can select Mono or Stereo if the Analog broadcasting is sending the MTS (Multi channel television sound).

You can select SAP while your TV is receiving the Analog broadcasting that has the SAP (Second Audio Program).

Audio	Mono	to output mono-audio
	Stereo	to output stereo-audio
setting
	SAP	to output second-audio program

You can set the digital audio output format.

Digital	PCM	to output PCM
output	Bitstream	to output Bitstream (When the audio of the
format		content is PCM, it will be output in PCM
		even if Bitstream is selected.)

Digital TV operation

You can select the Audio language while your TV is receiving the Digital broadcasting.

Audio	to select the language according to your preference.
Language	(It differs depending on the program.)

20 English

Setup

Note

••The Setup menu item is disabled for non-tuner sources..

Setup allows user to do channel installation and other settings for tuner sources.

1 Press (MENU) to display Home Menu and use ▲▼ to select Setup, then press OK.

Picture	Autoprogram
Sound	Antenna
Setup	Channel list
Features	Audio only	Off
USB	Auto aspect ratio	On

2 Use ▲▼◄► to select the item you want to adjust, then press OK.

Autoprogram	Select one option to install channels: Antenna or Cable.
Antenna	This item is only applicable when input source is in DTV. A
	Channel Strength menu will appear on the TV screen indicating
	the signal strength of DTV.
Channel list	Displays a list of available channels.
Audio only	Select to turn off the panel screen and keep only the sound on.
Auto aspect	Select On to select the appropriate video aspect ratio based on
ratio	information present in input MPEG stream from tuner source.
	Selecting Off uses TV's current Aspect ratio setting.