|
|
|
|
|
| 33 |
| English |
7 Useful tips |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
FAQ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Question | Answer |
|
|
|
|
|
| |
My remote control does not | • | Check the antenna or cable connection to the main unit. |
|
|
|
| ||
work. | • | Check the batteries of the remote control. |
|
|
|
|
| |
What should I do? | • Check if there is an obstacle between the infrared sensor window and the remote control. |
| ||||||
• | Test the signal Output use IR Signal Check. | p. 36 If okay, then possible infrared sensor trouble. |
| |||||
|
| |||||||
| • Aim the remote control directly at the infrared sensor window on the front of the unit. |
| ||||||
| • Reduce the distance to the unit. |
|
|
|
|
| ||
| • |
|
|
|
| |||
| • When there is an |
| ||||||
|
| unit. Movethe |
| |||||
|
| infrared communication function. |
|
|
|
|
| |
How come the initial setup | • | Make sure to complete the initial setup before the unit goes into Standby mode. |
| |||||
appears every time I Turn |
|
|
|
|
|
|
|
|
On this unit? |
|
|
|
|
|
|
|
|
Why can I not watch some | • | Autoprogram must be completed when you set up the unit for the first time or move it to a location where |
| |||||
RF signal TV programs. |
| previously unavailable channels are broadcast. | p. 21 |
|
|
|
| |
| • | Make sure Autoprogram has been completed. |
|
|
|
| ||
| • The selected channel may not be broadcasting. |
|
|
|
|
| ||
| • When Autoprogram is interrupted and not completed, some channels will not be received. Make sure to complete |
| ||||||
|
| the Autoprogram. | p. 21 |
|
|
|
|
|
| • | The selected channel cannot be viewed by the Child lock setting. | p. 23 |
| ||||
| • The unit requires some kind of antenna Input. An indoor antenna (Digital or VHF / UHF), an external antenna (Digital |
| ||||||
|
| or VHF / UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the unit. |
| |||||
How come there is no image | • | Check if the correct Input mode is selected by pressing | SOURCE. Watching channels from an external device |
from the connected external |
| p. 16 |
|
devices? | • | Check the antenna, cable or other Input connection to the unit. | |
•When using the Component Video Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/Cr) connectors are connected to their corresponding colored jacks on the unit.
When I enter a channel | • Many Digital channels have alternate channel numbers.The unit changes the numbers automatically to the ones | ||
number, it changes | signifying the broadcasting station channel number.These basic numbers used for previous Analog broadcasts. (e.g., | ||
automatically. | Input ch# 30 automatically changes to ch# 6.1) | ||
Why are captions not | • Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts. Most captioning | ||
displayed entirely? Or, | |||
production companies can display a dialog to maximum of 220 words per minute. If a dialog exceeds that rate, | |||
captions are delayed behind | |||
selective editing is used to insure that the captions remain | |||
the dialog. | |||
|
| ||
How can I set the clock ? | • There is no clock function on this unit. | ||
|
| ||
I cannot change the Child | • Although the default PIN code (0000) is supplied with the unit, the PIN code will be required once you set a PIN | ||
lock setting because my PIN | code in Child lock. | p. 23 When you forget your PIN code, enter 9999 in Change PIN to reset the PIN code. | |
code no longer works. | p. 25 |
| |