Connecting devices, Upgrading the software

Upgrading the software

USB upgrade

You can upgrade the software by using USB Memory Stick.

1 Connect your USB Memory Stick with the upgrade file to the USB terminal on the side of your TV.

2 Press (MENU) to display Home Menu and use ▲▼ to select Features, then press OK.

3 Use ▲▼ to select Software upgrade, then press OK.

4 Use ▲▼ to select Upgrade, then press OK.

5 Use ▲▼ to select USB.

6 Use ▲▼ to select Check, then press OK.

7 Read the on-screen instructions and confirm that you want to continue with the installation.

29 English

6 Connecting devices

No supplied cables are used with these connections:

• Please purchase the necessary cables at your local store.

Before you connect AC power cord:

Be sure other devices are connected properly before plugging in the AC power cord.

Selecting your connection quality

HDMI - Highest quality

Supports high-definition Digital signals and gives highest picture and sound quality. Video and Audio signals are combined in one cable. You must use HDMI for full high-definition video and to enable Philips EasyLink.

Note

Picture

Sound

Setup

Features

USB

Software upgrade

Do not remove the USB storage device or turn TV off while upgrade is in progress.

Current Version:	v2.04
New Version:	v2.05

50%

•Philips HDMI supports HDCP (High-bandwidth Digital Contents Protection). HDCP is a form of Digital Rights Management that protects high definition content in Blu-ray discs or DVDs.

•The HDMI-ARC connector on the TV features HDMI-ARC functionality. This allows output of TV Audio to an HDMI-ARC-compliant device.

Component (Y Pb Pr) - High quality

8 When the software upgrade is completed, remove the USB Memory Stick, then press OK to reboot the TV.

9 Unplug the AC power cord for a few seconds from AC outlet and plug it again.

10Press again to turn the unit On.

•The TV starts up with the new software.

For further assistance, please contact Call Center.

Note

•All settings will remain the same even if you update the software version.

Supports high-definition Analog signals but gives lower picture quality than HDMI. Component (Y/Pb/Pr) Video cables combine Red / Green / Blue video cables with Red / White Audio (L/R) cables. Match the cable colors when you connect to the TV.

Composite - Basic quality

For Analog connections. Composite Video / Audio Analog cable usually combine a Yellow video cable with Red / White Audio (L/R) cables.

With this unit, Yellow cable must be connected to Y (Green) of Component Video Input jacks.