Philips 50PFL5708/F7, 32PFL5708/F7, 40PFL5708/F7, 39PFL5708/F7 Cursor Tint, Cursor Backlight, Reset

	Access advanced settings.
	Color	Select a predefined color temperature, or
	alignment	adjust Red / Green / Blue gain and offset.
	Noise	Select the amount of noise reduction for the
	reduction	picture. (Off, Low, Middle, and High)
		Cursor ◄	Cursor ►
	Tint	to add green	to add red
	Sharpness	to soften	to sharpen
Advanced	Dynamic	Dynamically enhance the details in the dark,
Settings	contrast	medium, and light areas of the picture.
	Dynamic	Dynamically adjusts backlight level based on

19 English

Sound

Before you begin:

You must set Home in Location. p. 26

Otherwise, personalized picture and sound settings will not be memorized after the unit goes into Standby mode.

1 Press (MENU) to display Home Menu and use ▲▼to select Sound, then press OK.

2 Use ▲▼◄► to select the item you want to adjust, then press

OK.

•The following sound settings can be configured. Depending on the sound source, some sound settings are not available.

backlight	average brightness of the picture frame.
Aspect ratio	Select the picture ratio to suit the video
	source.
	(Normal, Zoom, Wide, Cinema, and Auto)
Overscan	Select to turn On or Off the overscan
	function.
	Cursor ◄	Cursor ►
Backlight	to reduce power	to set the backlight
	consumption	brighter

Reset

Picture Select to restore the default picture settings, while channel Settings installation settings remain the same.

Picture

Sound

Setup

Features

USB

Auto sound	Standard
Equalizer
DTS TruSurround	On
Auto volume leveling	Off
Balance	0
TV speakers	Speakers EasyLink
Advanced sound
Reset sound settings

Picture

Sound

Setup

Features

USB

Color alignment
Noise reduction	Middle
Tint	0
Sharpness	55
Dynamic contrast	On
Dynamic backlight	Off
Aspect ratio	Normal
Overscan	On
Backlight	55

Auto sound	to select the desired setting, then press OK
	(Standard, Movie, Music, Sports, News, and Personal)
Equalizer	to select the specific frequency and use ◄► to adjust the level,
	then press OK
DTS	Enable DTS TruSurround to enhance your audio experience.
TruSurround
Auto	Dynamically adjusts volume across different channels and sources
volume
	to maintain a consistent level.
leveling
Balance	Adjust the balance of the right and left speakers to best suit your
	listening position.
	Select On to output sound from TV speakers, Off to manually
	turn off TV speakers and enable Digital Audio Output.

TV speakers Speakers EasyLink uses HDMI-CEC to automatically turn off TV speakers and direct sound to connected HDMI-CEC compliant

	Color	to set the color temperature to Cool,
	temperature	Normal, Warm and Personal.
		When you adjust the following settings,
	mode
		Personal will be set automatically.
		Cursor ◄	Cursor ►
	Red gain	to decrease contrast	to increase contrast
		with red	with red
Color
	Green gain	to decrease contrast	to increase contrast
alignment		with green	with green
	Blue gain	to decrease contrast	to increase contrast
		with blue	with blue
	Red offset	to decrease brightness	to increase brightness
		with red	with red
	Green offset	to decrease brightness	to increase brightness
		with green	with green
	Blue offset	to decrease brightness	to increase brightness
		with blue	with blue

Home Theater System using HDMI-ARC or Digital Audio Port if it detects one.

	Digital	Select the type of digital audio output: Bitstream,
	output
		PCM.
	format
Advanced
	Audio	Select the audio mode from: Mono, Stereo, and
sound	setting	SAP. For use of Analog TV only.
	Audio	You can select your preferred audio language
		when TV channel broadcasts multiple/dual audio
	Language
		languages.

Reset sound Select to restore the default sound settings, while channel settings installation settings remain the same.