Philips 39PFL5708/F7, 32PFL5708/F7, 40PFL5708/F7, 47PFL5708/F7 USB Memory Stick, VGA connection

Page 32

VGA connection

This unit is equipped with a PC Input jack. If you connect this unit to your PC, you can use this unit as a PC monitor.

Use a VGA cable for this Video connection and it requires a Stereo mini 3.5mm plug Audio cable for Analog Audio signal as well.

For 32PFL5708/F7 and 39PFL5708/F7

PC

Stereo mini 3.5 mm plug Audio cable

IN

OUT

IN

VGA cable

OUT

For 40PFL5708/F7, 47PFL5708/F7 and 50PFL5708/F7

PC

OUT

IN Stereo mini 3.5 mm plug Audio cable

IN

VGA cable

OUT

-The following video signals can be displayed:

Resolution

Refresh rate

 

 

640 x 480

 

 

 

720 x 480

 

 

 

800 x 600

 

 

 

1024 x 768

 

 

 

1280 x 768

60Hz

 

 

1280 x 1024

 

 

 

1600 x 900

 

1680 x 1050

 

 

 

1920 x 1080

 

 

 

Other formats or non-standard signals will not be displayed correctly.

Note

Please purchase the VGA cable or HDMI-DVI conversion cable that has a ferrite core.

The following operations may reduce noise.

Attach a ferrite core to the AC power cord of your PC.

Unplug the AC power cord and use the built-in battery of your PC.

Use an HDMI cable with the HDMI logo (a certified HDMI cable). High Speed HDMI cable is recommended for the better compatibility.

The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.

HDMI-DVI connection requires separate Audio connections as well and the Audio signals are output as Analog (L/R) Audio.

DVI does not display 480i image which is not in compliance with EIA/CEA-861/861B.

32 English

USB Memory Stick

This unit offers easy playback of picture, music and movie files. Insert the USB Memory Stick into the USB terminal shown below. USB p. 27

Note

The unit recognizes only a USB Memory Stick.

Do not use a USB hub or an extension cable to connect an external hard disk drive to the unit. (Not supported.)

A USB Memory Stick is always inserted to this unit directly.

A USB Memory Stick is not supplied with this unit.

We do not guarantee that all USB Memory Sticks can be supported by this unit.

Be sure to keep a backup copy of the original files on your device before you play them back on this unit. We have no responsibilities for damage or loss of your stored data.

To protect your USB Memory Stick files from being erased place the write protect slid- ing tab in the protect position.

When you are ready to remove a USB Memory Stick, set the unit to go into Standby mode to avoid any damage to your data and the unit.

A USB Memory Stick that requires its own driver or the device with a special system such as fingerprint recognition are not supported.

This unit is not allowed to use the USB Memory Stick which requires an external power supply (500mA or more).

Image 32
Contents Register your product and get support at Contents Product Safety Notification Additional Benefits Accompanying the apparatusWall Mount Bracket Kit Brand Sanus 32PFL5708/F739PFL5708/F7 47PFL5708/F7Pixel characteristics WarrantyFederal Communications Commission Notice Modifications CablesCopyright Consumer NoticePositioning the TV Regulatory noticesEnvironmental care Downloading an electronic copyFeatures Supplied accessoriesGet started DTV / TV / CatvInstalling the remote control batteries Slide the battery cover off the back of the remote controlAttaching the base M4-10mmRemote control function ③ POWER/STANDBY Control panelTerminals 32PFL5708/F7 and 39PFL5708/F7Connecting the antenna or unencrypted cable Plugging in the AC power cordInitial setup Before you beginIf you want to change the location setting If you want to change to another languageSwitching on your TV and putting it in Standby mode Adjusting volumeSwitching channels Use your TVAccess the Home menu Sleep timerWatching channels from an external device Changing picture formatFor 169 video signal Auto Zoom Wide Cinema For 43 video signal AutoCinema Wide ZoomFor PC Input signal TV screen informationUse more of your TV Cursor Backlight ResetCursor Tint Setting Use to select the item you want to adjust, then press OKYou can set the digital audio output format Digital OutputTV remote control for channel browsing Channels will be skipped when using CH + / CH − key on yourAutoprogram Channel listLanguage Use to select English, Français, or Español, then press OKChild lock Channel lockUS TV and movie ratings Indicates that the channel or Input Source is lockedCanada English or Canada French ratings AllCaption settings Change PINDevice list EasyLinkLocation Sticker Use to select the PHOTO, MUSIC, or MOVIE, then pressFiles encoded in the following formats are supported PhotoUse to select a file or a folder StopSelecting your connection quality Connecting devicesUpgrading the software Connecting your devices Hdmi Digital connectionHDMI-DVI connection HDMI-ARC connectionComponent Analog Video Connection PC connectionDigital Audio Output Connection Digital Audio coaxial cableUSB Memory Stick VGA connectionWhen I enter a channel Why are captions notNumber, it changes AutomaticallyTroubleshooting SourceInformation GlossaryMaintenance Cabinet CleaningSpecifications Warranty Warranty CoverageWhat is Covered What is not Covered Exclusions and LimitationsUSA, Inc. PO Box 2248, Alpharetta, GA