Philips DVP3200V/37B user manual Disc Playback

Page 18

E8A21UD_EN1 5/29/06 3:13 PM Page 18

English

18 Disc Playback

Before you begin, turn on the TV, Stereo and other equipment

 

 

connected to the DVD/VCR. Make sure the TV and the Stereo (if

 

applicable) are set to the correct channel.

 

Details are on pages 8-14.

 

1 Press y to turn on the DVD/VCR.

 

Press DVD so DVD light appears on the front of the

 

2 DVD/VCR.

 

Press OPEN/CLOSE A on the DVD/VCR to open

 

3 the disc tray.

 

Place a disc into the tray. If the DVD is recorded on

 

only one side, place the disc in the tray with the label facing

 

4 up and the shiny side facing down. Some DVDs are

 

recorded on both sides. Make sure the label of the side you

 

want to play is facing up.

 

Press PLAY B to close the tray. The tray will close and

 

playback will begin. If playback does not start automatically,

 

5 press PLAY B again.

 

If a DVD menu appears instead, see page 40.

 

To play MP3, Windows MediaTM Audio, JPEG or DivX® files,

 

see pages 51-54.

 

You also can close the tray by pressing

 

OPEN/CLOSE A.

 

6 Press STOP C to stop playback.

REMINDER:This DVD/VCR will play only certain discs.

See page 7 for details.

 

 

 

 

 

 

1

TV/VIDEO

VCR

 

 

DVD

VCR Plus+

2

SUBTITLE

AUDIO

ANGLE

ZOOM

DISC/VCR

 

 

 

 

DVD

 

MENU

 

 

 

 

SETUP

 

 

 

 

OK

 

 

5

BACK

 

 

 

 

 

 

 

 

 

 

DISPLAY

REW

 

 

PLAY

 

FFW

PREV

REC

PAUSE

STOP

NEXT

6

3 Press OPEN/CLOSE A

on the DVD/VCR.

4 Insert a disc.

Helpful Hints

An “X” may appear at the top right corner of the TV screen when you try a feature. Either the feature is not available on the disc, or the DVD/VCR cannot access the feature at this time. This does not indicate a problem with the DVD/VCR.

If a disc is dirty or scratched, the picture may appear distorted or playback may stop. In such cases, remove the disc and turn off the DVD/VCR. Disconnect the power cord, then reconnect it. Clean the disc, then turn on the DVD/VCR again and reinsert the disc for playback.

If a disc has multiple layers, the picture may freeze occasionally. This happens when the first layer switches to the second layer. This is not a malfunction.

When the DVD or CD light appears on the display panel, the disc is loaded and ready for playback.

When you press OPEN/CLOSE A or PLAY B (DVD) on the front of the DVD/VCR when the power is off, the DVD/VCR will turn on in DVD mode. Otherwise, the DVD/VCR will turn on in the mode in which it was turned off.

If you use PLAY B to close the disc tray, playback starts automatically. If you use OPEN/CLOSE A to close the disc tray, you have to press PLAY B to start playback.

Image 18
Contents Need help fast? Besoin d’une aide Rapide?Necesita ayuda Inmediata? Proof of Purchase For Customer UseImportant Safety Instructions Declaration of Conformity Safety Information cont’dSafety Precautions BoxTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connection1Antenna or Cable TV Signal Hookups cont’dSignal RF coaxial cable ConnectionsRemember Cable SignalDVD/VCR RF coaxial cable TV’s AntennaComposite or Baseband video Jack of your DVD/VCRDVD/VCR Audio OUT jacks on the DVD/VCR and to the red Video OUT jacks on the DVD/VCR and to the ComponentCheck your Stereo manual for details Antenna/Cable TV SignalDVD/VCR to a TV and a Stereo Back of TV Example only1Antenna/Cable TV Signal Putting Batteries in the Remote Control Using the Remote ControlRecycling Guidelines/Battery Safety Repeat this process if the power fails Turn on the TVVideo Cassette Playback On the DVD/VCRDisc Playback VCR Display Panel Display PanelDVD Display Panel Display MessagesFront Panel Front Panel, Rear Panel and Remote ControlRemote Control Rear PanelAdding/Deleting Channels Channel SetupPress s or B to switch ADD/DELETE To scan through only the memorized channels, use CH + or CHWhile the DAY space is flashing, press K or L until Clock VCRPress VCR, then press DISC/VCR Menu so MENU1 While the Year space is flashing, press K or LPress Clear to remove the menu EnglishPress Display again to remove all the displays Remove Cover Tab to prevent Videotape RecordingRecording Prevention RecordingPress TV/VIDEO once to put the DVD/VCR in TV Remote control to return to channel 03 or 04 atPress TV/VIDEO on the DVD/VCR remote control To put the DVD/VCR in VCR position. The VCR lightOne-Touch Recording Stopping an OTRMake the connections shown above Point the remote control at DVD/VCR 2. PressRerecording Tape Duplication Turn on the TV and set it to channel 03 or 04Timer Recording When a timer recording ends Timer Recording cont’dOn for the timer recording Cancelling a Timer Recording before the Recording StartsPut the DVD you want to copy in the disc tray Be possible only if the DVD is not copy protectedDVD Press REC I to start recording. REC will appear onBox/DBS output channel for every Guide channel ChannelsInstructions continue on the next Guide CH User CHSteps Instructions from the previousTell the VCR the Guide and User channels by following Examine the lists onPress the Number buttons to enter the PlusCode Press VCRPress VCR Plus+ Then, press VCR Plus+Press K or L until your desired tape speed appears Press K or L until your desired channel numberAppears. Then, press B Press ClearPress Timer SET for the recording Repeat Playback Tape CounterTime Search Index SearchAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound Multi-Channel Television Sound/Hi-Fi StereoUnderstanding Displays Hi-Fi StereoPlayback Control PBC Function Using the Title MenuMenus, Playback Control PBC Function Press K, L, s or B to select an item, then press OKX1.3 and x0.8 Rapid Play with Voice To resume normal playback, press Play BTitle/Chapter/Time Search Title/Chapter SearchTrack Search Paused and Step-by-Step Playback, Resume On Paused and Step-by-Step PlaybackResume On Repeat To cancel A-B Repeat, press Repeat A-B. OFF willRepeat, A-B Repeat Let you start over OFF will appear briefly onElapsed playing time will appear beneath the Markers MarkersScreen Display will disappear in about 30 seconds, or pressSubtitles Camera AnglesDVD Audio Language, Stereo Sound Mode Stereo Sound ModeAudio Language Press Pause F during DVD, Video CD or DivX Playback Slow MotionZoom Press Play B to return to normal playbackProgram/Random Playback Program PlaybackRandom Playback When you put a CD-R or CD-RW with MP3 MP3/Windows MediaTM Audio/JPEG PlaybackTo stop playback, press Stop C Press DISC/VCR Menu during MP3/JPEG playback Dual PlaybackFolder Playback Press K or L to select a folder, then press Play B or OKDivX Playback DivX SubtitlePress K or L to select the desired group folder or Hint Play BDVD Displays Press DVD to put the DVD/VCR in DVD modeOn-Screen Displays Video CD and Audio CD DisplaysDuring Windows Media TM Audio playback Press Display or Back to remove the displayBlack Level Black Level,Virtual SurroundInitializing Virtual SurroundLanguage OriginalDisc Menu Language cont’dLanguage Codes KinyarwandaPress s or B to select DISPLAY, then Press OK Select a setting, then press OKDisplay Press K or L to select an item, then press OKProgressive Scan Default setting is OFFDisplay cont’d Jacks. Choose OFF otherwiseIf you selected DRC, press OK repeatedly to AudioPress s or B to select Custom at the top Turn Dynamic Range Control DRC On orPress DVD to put the DVD/VCR in DVD mode. DVD While playback is stopped, press DVD/SETUPPassword CHANGE, then press OK Press s or B to select CUSTOM, then press OKParental Levels Rating ExplanationsDefault setting is on OthersPress s or B to select Default setting is 5 sec Press DVD/SETUP to remove the menusOthers cont’d Glossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d Cleaning the Video Heads DVD/VCR ejects the tape when you press REC I or Timer SETLine input mode You cannot insert a video cassetteCare and Maintenance Limited Warranty Philips Limited Warranty ONE 1 YearInformation Index Memo