Philips DVP3200V/37B Videotape Recording, Recording Prevention, Remove Cover Tab to prevent

Page 24

E8A21UD_EN1 5/29/06 3:13 PM Page 24

24Videotape Recording

English

Read and follow the steps below to record a television program onto a videotape.

●Before you begin, make sure the DVD/VCR is in VCR mode. Press VCR so VCR light appears on the front of the DVD/VCR.

1 Turn on the TV and set it to channel 3 or 4 or the Video In channel. If you connected the DVD/VCR to the TV using the supplied audio and video cables, select your TV’s Video In channel. Details are on page 12.

If you connected the DVD/VCR to the TV using the supplied RF coaxial cable, choose channel 3 (or 4) at the TV. Details are on pages 9-11.

1 Turn on the TV.

2 Insert a tape in the DVD/VCR.

OK

2 Insert a tape with its record tab intact into the cassette compartment of the DVD/VCR. If tape playback begins, press STOP C.

3 Press REC MODE repeatedly until the desired tape speed (SP or SLP) appears briefly on the screen. Details about tape speed are on page 67.

4 Press CH + or CH - or the Number buttons to select the TV channel to record.

5 Press REC I to start recording. “REC” will appear on the DVD/VCR’s display panel.

6 To pause the recording, press PAUSE k once. “REC” will flash. To resume recording, press REC I or press PAUSE k again. “REC” will reappear.

7 To stop recording, press STOP C.

6	BACK
6	REW
	PREV
5-6	REPEAT
5-6	A-B
	REPEAT

4 RECCLEARMODE

3

DISPLAY

PLAY

		FFW
PAUSE		NEXT	7
REC	STOP	+	7
TIMER SET		CH	4
		CH

-

SEARCH MODE TITLE

Recording Prevention

Video cassettes have record tabs to ensure that recordings are not accidentally erased.

1 To prevent recording, break off the tab with a screwdriver.

2 To allow recording, cover the hole with clear tape.

Remove the		Cover the
tab to prevent		hole to allow
recording.		recording.
recording.		recording.

Helpful Hints

•Other recording options are on pages 25-30.

•The VCR will record in a preset volume.

•Pause will switch to Stop after 5 minutes to protect the VCR and the tape from damage. When a recording is paused, review the pause time remaining with

the ■ marks on the screen. Each ■ mark equals

1 minute remaining. During the last minute of paused recording, the ■ mark will flash.

•If any menu is on the TV screen, REC I on the remote does not function. Press CLEAR to remove the menu. Then, press REC I. Or, use REC I on the front of the DVD/VCR.

Image 24

Contents Need help fast? Besoin d’une aide Rapide?Necesita ayuda Inmediata? Proof of Purchase For Customer UseImportant Safety Instructions Safety Information cont’d Safety PrecautionsDeclaration of Conformity BoxTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connection1Antenna or Cable TV Signal Hookups cont’dSignal RF coaxial cable ConnectionsRemember Signal DVD/VCRCable RF coaxial cable TV’s AntennaJack of your DVD/VCR DVD/VCR Audio OUT jacks on the DVD/VCR and to the redComposite or Baseband video Video OUT jacks on the DVD/VCR and to the ComponentAntenna/Cable TV Signal DVD/VCR to a TV and a StereoCheck your Stereo manual for details Back of TV Example only1Antenna/Cable TV Signal Putting Batteries in the Remote Control Using the Remote ControlRecycling Guidelines/Battery Safety Repeat this process if the power fails Turn on the TVVideo Cassette Playback On the DVD/VCRDisc Playback Display Panel DVD Display PanelVCR Display Panel Display MessagesFront Panel, Rear Panel and Remote Control Remote ControlFront Panel Rear Panel Channel Setup Press s or B to switch ADD/DELETE Adding/Deleting Channels To scan through only the memorized channels, use CH + or CHClock VCR Press VCR, then press DISC/VCR Menu so MENU1While the DAY space is flashing, press K or L until While the Year space is flashing, press K or LPress Clear to remove the menu EnglishPress Display again to remove all the displays Videotape Recording Recording PreventionRemove Cover Tab to prevent RecordingRemote control to return to channel 03 or 04 at Press TV/VIDEO on the DVD/VCR remote controlPress TV/VIDEO once to put the DVD/VCR in TV To put the DVD/VCR in VCR position. The VCR lightOne-Touch Recording Stopping an OTRPoint the remote control at DVD/VCR 2. Press Rerecording Tape DuplicationMake the connections shown above Turn on the TV and set it to channel 03 or 04Timer Recording Timer Recording cont’d On for the timer recordingWhen a timer recording ends Cancelling a Timer Recording before the Recording StartsBe possible only if the DVD is not copy protected DVDPut the DVD you want to copy in the disc tray Press REC I to start recording. REC will appear onChannels Instructions continue on the nextBox/DBS output channel for every Guide channel Guide CH User CHInstructions from the previous Tell the VCR the Guide and User channels by followingSteps Examine the lists onPress VCR Press VCR Plus+Press the Number buttons to enter the PlusCode Then, press VCR Plus+Press K or L until your desired channel number Appears. Then, press BPress K or L until your desired tape speed appears Press ClearPress Timer SET for the recording Repeat Playback Tape CounterTime Search Index SearchAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound/Hi-Fi Stereo Understanding DisplaysMulti-Channel Television Sound Hi-Fi StereoUsing the Title Menu Menus, Playback Control PBC FunctionPlayback Control PBC Function Press K, L, s or B to select an item, then press OKX1.3 and x0.8 Rapid Play with Voice To resume normal playback, press Play BTitle/Chapter/Time Search Title/Chapter SearchTrack Search Paused and Step-by-Step Playback, Resume On Paused and Step-by-Step PlaybackResume On To cancel A-B Repeat, press Repeat A-B. OFF will Repeat, A-B RepeatRepeat Let you start over OFF will appear briefly onMarkers ScreenElapsed playing time will appear beneath the Markers Display will disappear in about 30 seconds, or pressSubtitles Camera AnglesDVD Audio Language, Stereo Sound Mode Stereo Sound ModeAudio Language Slow Motion ZoomPress Pause F during DVD, Video CD or DivX Playback Press Play B to return to normal playbackProgram/Random Playback Program PlaybackRandom Playback When you put a CD-R or CD-RW with MP3 MP3/Windows MediaTM Audio/JPEG PlaybackTo stop playback, press Stop C Dual Playback Folder PlaybackPress DISC/VCR Menu during MP3/JPEG playback Press K or L to select a folder, then press Play B or OKDivX Playback DivX SubtitlePress K or L to select the desired group folder or Hint Play BPress DVD to put the DVD/VCR in DVD mode On-Screen DisplaysDVD Displays Video CD and Audio CD DisplaysDuring Windows Media TM Audio playback Press Display or Back to remove the displayBlack Level,Virtual Surround InitializingBlack Level Virtual SurroundLanguage OriginalLanguage cont’d Language CodesDisc Menu KinyarwandaSelect a setting, then press OK DisplayPress s or B to select DISPLAY, then Press OK Press K or L to select an item, then press OKDefault setting is OFF Display cont’dProgressive Scan Jacks. Choose OFF otherwiseAudio Press s or B to select Custom at the topIf you selected DRC, press OK repeatedly to Turn Dynamic Range Control DRC On orWhile playback is stopped, press DVD/SETUP Password CHANGE, then press OKPress DVD to put the DVD/VCR in DVD mode. DVD Press s or B to select CUSTOM, then press OKParental Levels Rating ExplanationsDefault setting is on OthersPress s or B to select Default setting is 5 sec Press DVD/SETUP to remove the menusOthers cont’d Glossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d DVD/VCR ejects the tape when you press REC I or Timer SET Line input modeCleaning the Video Heads You cannot insert a video cassetteCare and Maintenance Limited Warranty Philips Limited Warranty ONE 1 YearInformation Index Memo