Philips DVP3200V/37B user manual You cannot insert a video cassette, You cannot remove the tape

Page 70

E8A21UD_EN2 5/15/06 8:04 PM Page 70

English

70 Helpful Hints (cont’d)

You cannot insert a video cassette.

•Insert the tape, window side up, with the record tab facing you.

•

Make sure a tape isn’t already in the VCR by pressing STOP/EJECT C A on the front of the DVD/VCR.

•

Gently push on the center of the tape when putting it in the VCR. Never force the tape into the VCR.

•If a timer recording is set, you cannot insert a tape without a record tab.

You cannot remove the tape.

•Make sure the power plug is completely connected to a power outlet.

•If a timer recording has been set, press TIMER SET on the remote control or STOP/EJECT C A on the front panel to cancel the timer standby mode temporarily. “ ” will disappear from the display panel.Then, press STOP/EJECT C A on the front of the DVD/VCR to eject the tape. Insert another tape and press TIMER SET to reset the timer recording.

•Unplug the DVD/VCR power cord for 5 minutes. Then, plug in the power cord again and pressy on the DVD/VCR. Press STOP/EJECT C A on the DVD/VCR 3 to 5 times. If the tape still does not eject, you may need to have an authorized servicer remove the tape.

DVD/VCR ejects the tape when you press REC I or TIMER SET.

•Make sure the tape has a record tab. Details are on page 24.

Satellite Receiver Hookups

•Watching one TV channel while recording another may not be possible if you have a Satellite Receiver. Set your TV to channel 03 or 04, then make your channel selections at the Satellite Receiver.

•With many Satellite Receiver hookups, if you use audio and video cables to connect your DVD/VCR to your TV, you will have to put your DVD/VCR in line input mode (L1 or L2).

Line input mode

•If you accidentally enter line input mode (L1 or L2 will appear on your TV screen briefly), press CH + or CH - or the Number buttons to select another channel.

Hi-Fi Stereo Sound

•During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking.

•When connecting the DVD/VCR to a TV with the red and white audio cable, you will only get stereo sound if you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, and if the TV is on its Audio/Video In channel. See your TV owner’s manual for details.

•When you connect the DVD/VCR AUDIO OUT jacks on the DVD/VCR to the AUDIO IN jacks on your TV, the stereo light on the TV might not glow. If the Status Display indicates you are receiving stereo, you are. Details are on page 39.

•Only tapes recorded in Hi-Fi audio will play in Hi-Fi audio. Tapes recorded in normal audio will play in monaural (single-channel) audio.

Cleaning the Video Heads

•Your DVD/VCR automatically cleans the video heads of the VCR each time you insert a tape. However, the heads may become dirty. If so, have an authorized servicer clean the video heads. Eventually, the heads may need to be replaced.

The playback picture is too dim, too bright or fluctuates in brightness.

•Some programs may be broadcast with copyright protection technology in order to protect the rights of copyright owners. This technology is used on programs that are recorded on video cassettes or DVDs, as well as some programs broadcast by antenna/cable/satellite television channels. Programs broadcast with copyright protection may not record clearly. Likewise, if you play a tape that is a recording of a copyright protected program, the picture may not be clear. Tapes of copyright protected programs may have a picture that is dark or dim, or the brightness of the picture may fluctuate. Therefore, avoid recording or playing copies of copyright protected programs.

Page 69 Page 71
Image 70
Page 69 Page 71
Contents Besoin d’une aide Rapide? Need help fast?Necesita ayuda Inmediata? Proof of Purchase For Customer UseImportant Safety Instructions Declaration of Conformity Safety Information cont’dSafety Precautions BoxTable of Contents Introduction Playable Discs and Video Cassettes Hookups Determining the best possible connection1Antenna or Cable TV Signal Hookups cont’dConnections Signal RF coaxial cableRemember Cable SignalDVD/VCR RF coaxial cable TV’s AntennaComposite or Baseband video Jack of your DVD/VCRDVD/VCR Audio OUT jacks on the DVD/VCR and to the red Video OUT jacks on the DVD/VCR and to the ComponentCheck your Stereo manual for details Antenna/Cable TV SignalDVD/VCR to a TV and a Stereo Back of TV Example only1Antenna/Cable TV Signal Using the Remote Control Putting Batteries in the Remote ControlRecycling Guidelines/Battery Safety Repeat this process if the power fails Turn on the TVVideo Cassette Playback On the DVD/VCRDisc Playback VCR Display Panel Display PanelDVD Display Panel Display MessagesFront Panel Front Panel, Rear Panel and Remote ControlRemote Control Rear PanelAdding/Deleting Channels Channel SetupPress s or B to switch ADD/DELETE To scan through only the memorized channels, use CH + or CHWhile the DAY space is flashing, press K or L until Clock VCRPress VCR, then press DISC/VCR Menu so MENU1 While the Year space is flashing, press K or LEnglish Press Clear to remove the menuPress Display again to remove all the displays Remove Cover Tab to prevent Videotape RecordingRecording Prevention RecordingPress TV/VIDEO once to put the DVD/VCR in TV Remote control to return to channel 03 or 04 atPress TV/VIDEO on the DVD/VCR remote control To put the DVD/VCR in VCR position. The VCR lightOne-Touch Recording Stopping an OTRMake the connections shown above Point the remote control at DVD/VCR 2. PressRerecording Tape Duplication Turn on the TV and set it to channel 03 or 04Timer Recording When a timer recording ends Timer Recording cont’dOn for the timer recording Cancelling a Timer Recording before the Recording StartsPut the DVD you want to copy in the disc tray Be possible only if the DVD is not copy protectedDVD Press REC I to start recording. REC will appear onBox/DBS output channel for every Guide channel ChannelsInstructions continue on the next Guide CH User CHSteps Instructions from the previousTell the VCR the Guide and User channels by following Examine the lists onPress the Number buttons to enter the PlusCode Press VCRPress VCR Plus+ Then, press VCR Plus+Press K or L until your desired tape speed appears Press K or L until your desired channel numberAppears. Then, press B Press ClearPress Timer SET for the recording Repeat Playback Tape CounterTime Search Index SearchAutomatic Operation Features Special Effects PlaybackMulti-Channel Television Sound Multi-Channel Television Sound/Hi-Fi StereoUnderstanding Displays Hi-Fi StereoPlayback Control PBC Function Using the Title MenuMenus, Playback Control PBC Function Press K, L, s or B to select an item, then press OKX1.3 and x0.8 Rapid Play with Voice To resume normal playback, press Play BTitle/Chapter/Time Search Title/Chapter SearchTrack Search Paused and Step-by-Step Playback Paused and Step-by-Step Playback, Resume OnResume On Repeat To cancel A-B Repeat, press Repeat A-B. OFF willRepeat, A-B Repeat Let you start over OFF will appear briefly onElapsed playing time will appear beneath the Markers MarkersScreen Display will disappear in about 30 seconds, or pressCamera Angles SubtitlesDVD Stereo Sound Mode Audio Language, Stereo Sound ModeAudio Language Press Pause F during DVD, Video CD or DivX Playback Slow MotionZoom Press Play B to return to normal playbackProgram Playback Program/Random PlaybackRandom Playback MP3/Windows MediaTM Audio/JPEG Playback When you put a CD-R or CD-RW with MP3To stop playback, press Stop C Press DISC/VCR Menu during MP3/JPEG playback Dual PlaybackFolder Playback Press K or L to select a folder, then press Play B or OKDivX Subtitle DivX PlaybackPress K or L to select the desired group folder or Hint Play BDVD Displays Press DVD to put the DVD/VCR in DVD modeOn-Screen Displays Video CD and Audio CD DisplaysDuring Windows Media TM Audio playback Press Display or Back to remove the displayBlack Level Black Level,Virtual SurroundInitializing Virtual SurroundLanguage OriginalDisc Menu Language cont’dLanguage Codes KinyarwandaPress s or B to select DISPLAY, then Press OK Select a setting, then press OKDisplay Press K or L to select an item, then press OKProgressive Scan Default setting is OFFDisplay cont’d Jacks. Choose OFF otherwiseIf you selected DRC, press OK repeatedly to AudioPress s or B to select Custom at the top Turn Dynamic Range Control DRC On orPress DVD to put the DVD/VCR in DVD mode. DVD While playback is stopped, press DVD/SETUPPassword CHANGE, then press OK Press s or B to select CUSTOM, then press OKParental Levels Rating ExplanationsOthers Default setting is onPress s or B to select Press DVD/SETUP to remove the menus Default setting is 5 secOthers cont’d Glossary Cable Box/Satellite Receiver Output Channel 03 orHelpful Hints Helpful Hints cont’d Cleaning the Video Heads DVD/VCR ejects the tape when you press REC I or Timer SETLine input mode You cannot insert a video cassetteCare and Maintenance Limited Warranty Philips Limited Warranty ONE 1 YearInformation Index Memo
Top Page Image Contents