Philips DVP3200V/37B user manual Care and Maintenance

Page 71

E8A21UD_EN2 5/15/06 8:04 PM Page 71

Care and Maintenance 71

Cleaning the DVD/VCR

Wipe the front panel and other exterior surfaces of the DVD/VCR with a soft, slightly damp cloth.

Never use a solvent, thinner, benzene or alcohol to clean the DVD/VCR. Do not spray insecticide liquid near the DVD/VCR. Such chemicals may discolor the surface or damage the DVD/VCR.

Cleaning a Disc

• Use a soft, dry cloth to wipe the disc.

• Wipe the disc in a straight line from the center to the edge. Never wipe the disc in a circular motion.

Do not use detergent or abrasive cleaning agents.

Handle the discs so fingerprints and dust do not adhere to the discs.

Always store the disc in its protective case when it is not in use.

Checking the Laser

If the DVD/VCR does not operate as described in this manual, the DVD player’s laser may be dirty. Consult an Authorized Service Center for inspection and cleaning of the laser.

Caring for Video Cassettes

Use only cassettes with the mark.

Remove any light adhesive stick-on notes from the video cassette before putting the cassette in the VCR. Removable labels can jam the VCR.

Caring for the VCR’s Video Heads

Periodic maintenance is required to maintain your DVD/VCR’s excellent performance. The VCR has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.

Specifications

English

VCR Video Heads

4 heads - Hi-Fi

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04

75 ohms unbalanced

DVD Color System

NTSC

Frequency Response

DVD (linear sound):

20 Hz to 22 kHz (sample rate: 48 kHz)

20 Hz to 44 kHz (sample rate: 96 kHz)

Audio CD: 20 Hz to 20 kHz

Signal-to-Noise Ratio

Audio CD: 100 dB JEITIA

(Japan Electronics and Information Technology Industries

Association)

Dynamic Range

DVD (linear sound): 90 dB

Audio CD: 85 dB (JEITIA)

Total Distortion Factor

Audio CD: 0.03% (JEITIA)

DVD: 0.03%

Wow and Flutter

Below the measurement limitation (±0.001% W PEAK) (JEITIA)

Power Requirement

120V AC +/- 10%, 60 Hz +/- 0.5%

Power Consumption

Power on: 21 W

Power off: 3.8 W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

30% to 80%

Dimensions

17.1” (W) x 3.7” (H) x 9.2” (D) (435mm x 94mm x 233mm)

Weight

6.0 lbs. (2.7 kg.)

NOTE: Designs and specifications are subject to change without notice.

Image 71
Contents Necesita ayuda Inmediata? Need help fast?Besoin d’une aide Rapide? For Customer Use Proof of PurchaseImportant Safety Instructions Box Safety Information cont’dSafety Precautions Declaration of ConformityTable of Contents Introduction Playable Discs and Video Cassettes Determining the best possible connection HookupsHookups cont’d 1Antenna or Cable TV SignalRemember Signal RF coaxial cableConnections RF coaxial cable TV’s Antenna SignalDVD/VCR CableVideo OUT jacks on the DVD/VCR and to the Component Jack of your DVD/VCRDVD/VCR Audio OUT jacks on the DVD/VCR and to the red Composite or Baseband videoBack of TV Example only Antenna/Cable TV SignalDVD/VCR to a TV and a Stereo Check your Stereo manual for details1Antenna/Cable TV Signal Recycling Guidelines/Battery Safety Putting Batteries in the Remote ControlUsing the Remote Control Turn on the TV Repeat this process if the power failsOn the DVD/VCR Video Cassette PlaybackDisc Playback Display Messages Display PanelDVD Display Panel VCR Display PanelRear Panel Front Panel, Rear Panel and Remote ControlRemote Control Front PanelTo scan through only the memorized channels, use CH + or CH Channel SetupPress s or B to switch ADD/DELETE Adding/Deleting ChannelsWhile the Year space is flashing, press K or L Clock VCRPress VCR, then press DISC/VCR Menu so MENU1 While the DAY space is flashing, press K or L untilPress Display again to remove all the displays Press Clear to remove the menuEnglish Recording Videotape RecordingRecording Prevention Remove Cover Tab to preventTo put the DVD/VCR in VCR position. The VCR light Remote control to return to channel 03 or 04 atPress TV/VIDEO on the DVD/VCR remote control Press TV/VIDEO once to put the DVD/VCR in TVStopping an OTR One-Touch RecordingTurn on the TV and set it to channel 03 or 04 Point the remote control at DVD/VCR 2. PressRerecording Tape Duplication Make the connections shown aboveTimer Recording Cancelling a Timer Recording before the Recording Starts Timer Recording cont’dOn for the timer recording When a timer recording endsPress REC I to start recording. REC will appear on Be possible only if the DVD is not copy protectedDVD Put the DVD you want to copy in the disc trayGuide CH User CH ChannelsInstructions continue on the next Box/DBS output channel for every Guide channelExamine the lists on Instructions from the previousTell the VCR the Guide and User channels by following StepsThen, press VCR Plus+ Press VCRPress VCR Plus+ Press the Number buttons to enter the PlusCodePress Clear Press K or L until your desired channel numberAppears. Then, press B Press K or L until your desired tape speed appearsPress Timer SET for the recording Tape Counter Repeat PlaybackIndex Search Time SearchSpecial Effects Playback Automatic Operation FeaturesHi-Fi Stereo Multi-Channel Television Sound/Hi-Fi StereoUnderstanding Displays Multi-Channel Television SoundPress K, L, s or B to select an item, then press OK Using the Title MenuMenus, Playback Control PBC Function Playback Control PBC FunctionTo resume normal playback, press Play B X1.3 and x0.8 Rapid Play with VoiceTitle/Chapter Search Title/Chapter/Time SearchTrack Search Resume On Paused and Step-by-Step Playback, Resume OnPaused and Step-by-Step Playback Let you start over OFF will appear briefly on To cancel A-B Repeat, press Repeat A-B. OFF willRepeat, A-B Repeat RepeatDisplay will disappear in about 30 seconds, or press MarkersScreen Elapsed playing time will appear beneath the MarkersDVD SubtitlesCamera Angles Audio Language Audio Language, Stereo Sound ModeStereo Sound Mode Press Play B to return to normal playback Slow MotionZoom Press Pause F during DVD, Video CD or DivX PlaybackRandom Playback Program/Random PlaybackProgram Playback To stop playback, press Stop C When you put a CD-R or CD-RW with MP3MP3/Windows MediaTM Audio/JPEG Playback Press K or L to select a folder, then press Play B or OK Dual PlaybackFolder Playback Press DISC/VCR Menu during MP3/JPEG playbackPress K or L to select the desired group folder or DivX PlaybackDivX Subtitle Play B HintVideo CD and Audio CD Displays Press DVD to put the DVD/VCR in DVD modeOn-Screen Displays DVD DisplaysPress Display or Back to remove the display During Windows Media TM Audio playbackVirtual Surround Black Level,Virtual SurroundInitializing Black LevelOriginal LanguageKinyarwanda Language cont’dLanguage Codes Disc MenuPress K or L to select an item, then press OK Select a setting, then press OKDisplay Press s or B to select DISPLAY, then Press OKJacks. Choose OFF otherwise Default setting is OFFDisplay cont’d Progressive ScanTurn Dynamic Range Control DRC On or AudioPress s or B to select Custom at the top If you selected DRC, press OK repeatedly toPress s or B to select CUSTOM, then press OK While playback is stopped, press DVD/SETUPPassword CHANGE, then press OK Press DVD to put the DVD/VCR in DVD mode. DVDRating Explanations Parental LevelsPress s or B to select Default setting is onOthers Others cont’d Default setting is 5 secPress DVD/SETUP to remove the menus Cable Box/Satellite Receiver Output Channel 03 or GlossaryHelpful Hints Helpful Hints cont’d You cannot insert a video cassette DVD/VCR ejects the tape when you press REC I or Timer SETLine input mode Cleaning the Video HeadsCare and Maintenance Philips Limited Warranty ONE 1 Year Limited WarrantyInformation Index Memo