How to Change Menu Setting
The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power.
Example
Remote control of this unit can be achieved by using the
[Configuration Menu]
≠
[Initial Param Menu]
≠
Display | 8 / 9 / ; / :buttons | |
|
| POWER |
POWER |
| ON |
| MULTI FORMAT | |
FAULT | HIGH DEFINITION | ENTER ESC |
TELEVISION | OFF | |
| ENCODER | |
ENTER ESC button button
[Control Mode]
≠
“Remote”
Operation Flow Chart
Press the ENTER button
Main Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Configuration Menu.
Display Flow Chart
Main Menu
+ C o n f i g u r a t i o n M e n u
Main Menu
+ C o n f i g u r a t i o n M e n u
Press the ENTER button
Configuration Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Initial Param Menu.
Press the ENTER button
Initial Param Menu screen will be displayed.
Press the 8 / 9 buttons
Select the Control Mode item and press the ENTER button.
Press the 8 / 9 buttons
Select the “Remote” and press the ENTER button.
Press the ESC button
C o n f i g u r a t i o n M e n u +Operate Param Menu
C o n f i g u r a t i o n M e n u + I n i t i a l P a r a m M e n u
I n i t i a l P a r a m M e n u >Control Mode :Local
I n i t i a l P a r a m M e n u >Control Mode: Local
I n i t i a l P a r a m M e n u >Control Mode:Remote
I n i t i a l P a r a m M e n u >Save & Reboot ?
Memo
The Operate Param Menu setting will be reflected in the output even if “Save & Reboot” is not executed.
Press the ENTER button
. . N o w I n i t i a l i z i n g . .
HDTV ENCODER
Caution
Do not turn off the power switch during “Now Initializ- ing” display.
The setting value may not be saved or may return to default setting.
16