Thank you for purchasing this
HDTV ENCODER
Main Features
Encoded to MPEG-2(ISO/IEC13818-2)
Input SMPTE292M(1080i/720p) standard HDTV digital se- rial video signal, encode it to
Supports SDI embedded Audio signal 2 channels
Encodes SMPTE299M standard SDI embedded Audio sig- nal 2 channels to
output as TS format.
Dolby™ Digital (AC-3) pass through Compli- ance
When Dolby™ Digital bitstream is applied to [AES/EBU] ter- minal, TS Format output could be obtained as this equip- ment is Dolby™ Digital
In addition, when PCM signal is applied to [AES/EBU] termi- nal, it is possible to encode with
Equipped with RS-232C terminal
If should be noted that it may be unlawful to
Each feature can be set or operated on the front panel with FL display. Besides, this unit can be
1U EIA size can be mounted to the rack
Owing to the compact size design, it can be mounted to the EIA rack.
Prior to important video/ audio recording, always perform a test recording to confirm that video/ audio is properly recorded.
Please note that we will not provide compensation for contents of video/ audio recording due to improper video/ audio recording caused by defects when using this equip- ment.
Dolby is a trademark of Dolby Laboratories.
3-2 Pull down feature
By converting to the SMPTE292M (1080i/720p) standard HDTV digital serial video signal, input movie film image that is 24 frame per one second can also be compressed to high quality using
Equipped with ASI output terminal
Video recording is possible by connecting to
4