Specifications

<Input signal>

Video input
HD SDI IN ⋅1	SMPTE292M (common for 1080i/720p)
	SMPTE299M (Embedded Audio)
	800 mVp-p, 75 Ω (BNC unbalanced)
	1080i:1920 ⋅ 1080 frame frequency 29.97Hz
	720p:1280 ⋅ 720 frame frequency 59.94Hz
Audio input
AES/EBU IN ⋅1	AES/EBU
	(48 kHz sampling frequency synchronized with video
	signal)
	1 Vp-p, 75 Ω (BNC unbalanced)

Synchronized input

REF IN ⋅1		SMPTE259M
		800 mVp-p, 75 Ω (BNC unbalanced)

Video output
MONITOR OUT ⋅1		SMPTE292M(common for 1080i/720p)
		800 mVp-p, 75 Ω (BNC unbalanced)
ASI OUT ⋅2		DVB/ASI(188byte format,packet mode)
		800 mVp-p, 75 Ω (BNC unbalanced)

MPEG-2	Video encoding profile			Video bit rate
(ISO/IEC13818-2)	1080i MP@HL	1920 ⋅ 1080 59.94 Hz		9Mbps~40 Mbps
	1080i MP@HL	1440 ⋅ 1080 59.94 Hz		9Mbps~40 Mbps
	1080i MP@HL	1280 ⋅ 1080 59.94 Hz		9Mbps~40 Mbps
	720p MP@H14L	1280 ⋅ 720 59.94 Hz		9Mbps~40 Mbps

MPEG-1 Layer 2	Stereo mode		Single mode
(ISO/IEC11172-3)	Bit rate	384 kbps	Bit rate	192 kbps
		256 kbps		128 kbps
		192 kbps		96 kbps
	Sampling	48 kHz	Sampling	48 kHz

Dolby™ Digital(AC-3) Pass		Channel	: 1-5.1 channel
Through		Sampling : 48 kHz
		Bit rate	: 56 kbps to 640 kbps

Interface		RS-232C ⋅1
Power supply		AC 120 V 50 Hz/60 Hz
Power consumption		70 W , 0.6 A
Allowable operating temperature		5 °C to 40 °C
Allowable storage temperature		–20 °C to 60 °C
Allowable operating humidity		30 % to 80 %
Mass		Approx. 10 k˝
Instruction Manual	⋅1	<Appearance>
			465
Power cord (2.4 m)	⋅1	[unit : mm]	430
Screws for mounting rack ...	⋅4
Label	⋅1

50/60Hz ~ 120V AC

635

665

482

*Dolby is a trademark of Dolby Laboratories.	27
*Specifications and appearance of this unit are subject to change for improvement without prior notice.