2.Fasten the control panel cord using the clip.
Clip
Fasten the cord so that the
Control panel cord portion under the clip is not slack.
Lift the control panel to remove.
7 Inserting the shoulder plate
1.Insert the plate into the pocket on the outer shoulder massage unit.
•Grasp the pocket and pull it slightly to expand the opening, so that the plate can be inserted easily.
Shoulder plate
Pocket
8 Attaching the pillow
1.Attach the pillow to the velcro fasteners.
• See page 38 for a guide to the position of the pillow
Pillow
Velcro fasteners
2.Slide the inserted plate for the outer shoulder to the inside (recommended position).
•The up/down and in/out positions of the plate can be adjusted.
The recommended position is when the plate is inserted into the deepest position and then moved to the most inside position.
•Grasp the pocket opening with one hand, hold the plate with the other hand, and move it into the deepest position.
Proper plate for each outer shoulder
(For the right |
| (For the left |
shoulder) |
| shoulder) |
|
|
|
|
|
|
|
|
|
15