Before sitting down
Check the following before using the unit
1 Check the surrounding area
Make sure there are no objects, people, or pets in the vicinity of the unit.
2 Check the power cord and the power plug
Warning
•Remove dust from the power plug periodically. Failure to observe this precaution may result in defective insulation of the cord due to moisture. Clean dust from the cord using a dry cloth.
•Do not damage the power cord and the power plug.
(Do not damage, expose to heat sources, bend, twist, pull forcibly, bundle or place heavy objects on the cord.)
Using a damaged power cord and/or the power plug may result in electric shocks, short circuits, or fires. Ask your sales dealer to repair the power cord and/or the power plug, or contact a customer service center.
Check
3 Switching on the power supply
1.Insert the power plug into an electrical outlet.
2.Turn the lock switch key to the “open” position.
3.Slide the power switch to the “on” position.
Warning
•Insert the power plug firmly until it stops completely.
Failure to observe this precaution may result in electric shocks or fires due to heat generation.
•Do not exceed the rated values of the plug and the wiring or use any voltage other than the rated voltage. (The unit cannot be used abroad or used with a transformer.)
Failure to observe this precaution may result in electric shocks, malfunctioning or fires due to heat generation.
•Do not handle the power plug with wet hands. Doing so may result in electric shocks.
4 Check the unit
1.Make sure there are no tears or rips in the fabric.
Warning
•Lift the back cushion and make sure the fabric on the backrest is not torn. (Even if it is torn very slightly, stop using the unit immediately, remove the power plug, and request repairs.)
Using the unit with the fabric torn may result in injury or electric shocks.
Fabric Check
Backrest Back cushion
16