3 Select the location you want to massage (
).
•You can select an action combined with “FULL ROLL” by pressing the 
button.
Display
4 Select the massage action (
).
By pushing on the body part again, the massage action will toggle down from ultra knead to tap. Shoulder massage will toggle all the way to grasp.
5 Press the |
| button to start the action. |
|
The massage will start after the body scanning.
Body scanning for Manual Operation
For the Neck/Shoulder: Normal body scanning.
Back/Lower back: Simple body scanning. (The massage heads will not come up to the shoulder position.)
To change an action in the middle of a massage
Select your favorite one again in Steps 3 to 5 .
•Press the 
button within approximately 30 seconds after reselecting an action in Step 3 , otherwise the reselection will be cancelled automatically.
Adding tapping, regional rolling, auto width
Press the following buttons ( | ). |
•These actions cannot be selected independently.
•These actions cannot be added to “GRASP”.
25