Polycom V2IU 4350 Create a Backup File and Save in Local Flash, List the Available Backup Files

User Manual V2IU 4350 Converged Network Appliance

1.Use a NULL modem cable to connect to serial port 1 of the 4350

2.Use a terminal emulator such as Hyperterminal set to a baud rate of 9600, 8, 1 and none (databits, stop bits and parity)

Alternatively you can connect to the 4350 remotely using SSH:

1.Logon as root

2.Enter the password

Once you are at the command prompt (#) you can create the backup file, store it to local flash, copy it to a remote TFTP server, copy it from a remote TFTP server, delete it, load it or list all available backup files.

Create a Backup File and Save in Local Flash

#ewn save <filename>

Saves the current running configuration.

Filename format (must use extension .conf1 or .conf2): <filename1>.conf1

<filename2>.conf2

<filenameX> can be a combination of both letters and characters. For example, EWN30_041503.conf1 or location1_E30.conf2. Trying to use any other filename format will result in the error message: “EWN_ERROR_BAD_FILE_NAME”.

Warning The “.conf” extensions have special significance. If you save a configuration with <filename-new>.conf1, then any existing <filename-old>.conf1 will be overwritten with the new one.

Copy a Backup File to a Remote TFTP Server

#ewn upload <filename> <tftp server IP Address>

Copy a backup file from the 4350 to a TFTP server.

Download a Backup File from a Remote TFTP Server

#ewn download <filename> <tftp server IP Address>

Download a backup file from a TFTP server to the V2IU.

List the Available Backup Files

#ewn list

List all backup files stored in FLASH. If no file has been saved, the command will only return the # prompt.

5 - 2