User Manual V2IU 4350 Converged Network Appliance
Connecting the Power and Cables
The 4350 comes with an AC power cord and power adapter for connecting the unit to the AC outlet.
Warning Always connect the AC power cord to an AC outlet suitable for the power supply that came with the unit in order to reduce the risk of damage to it.
•Connect one end of the AC power cord to the power adapter and the other one to the AC outlet.
•Connect plug from the power adapter to the Power Connector on the 4350. Sometimes a little force is necessary to get the plug properly positioned
Caution Secure the power adapter using a fastener or tie wrap to nearby shelf so that it does not hang from the power connector.
If you are connecting to the WAN using the T1, then connect the T1 cable to the T1/E1 port and the other end of the cable to the T1 line. Enable the T1 port from the Network Configuration Menu. In this case, the Ethernet WAN port will not be available.
If you are connecting to a WAN router, cable modem or DSL modem, then connect the Ethernet cable to the Ethernet WAN port on 4350 and the other end to the WAN device.
Administration of the 4350
The 4350 is configured using a web browser such as Internet Explorer or Netscape Navigator. The 4350 is shipped with a
1.Connect a PC using an IP address of 192.168.1.2 and subnet mask of 255.255.255.0 to LAN port 4 of the 4350.
2 - 4