Polycom V2IU 4350 user manual H.323 Settings page includes the following two buttons

Page 52

User Manual V2IU 4350 Converged Network Appliance

Some RAS messages can be multicast in order to automatically detect gate- keepers. In the Multicast Messages area, you can enable listening to multicast messages. This area includes the following configurable parameter:

Item

Description

 

 

Listen to multicast

Select this checkbox to enable listening to multicast

messages

messages.

 

 

In the H.460.18 Support area, you can configure H.460.18 support. This allows the system to do NAT/Firewall traversal for clients behind NAT or firewall devices. This area includes the following configurable parameters:

Item

Description

 

 

Disabled

Disables H.460.18 support.

Enabled

Enables H.460.18 support.

Keep-alive time(s)

Specifies the keep-alive time if H.460.18 support is

 

enabled.

 

 

In the Alias Restrictions area, you can set a limit on the number of aliases that are allowed to register with the system. If this number is exceeded when a cli- ent tries to register, the registration is rejected. This area includes the follow- ing parameter:

Item

Description

 

 

Max Aliases

Enter the maximum number of allowed aliases. If the value is set

 

to 0, the maximum is not enforced.

 

 

The H.323 Settings page includes the following two buttons:

Item

Description

 

 

Submit

Applies the settings configured on this page.

Reset

Clears all fields and selections and allows you to enter new

 

information.

 

 

3 - 34

Image 52
Contents V2IU 4350 Converged Network Appliance Trademark Information Contents Page Contents Saving and Restoring the V2IU 4350 Configuration System DiagnosticsUpgrading the V2IU 4350 Contents Page T1 Wide Area Network WAN Access Router V2IU 4350 Converged Network ApplianceFeature Summary Front Panel LEDs LED Label Activity DescriptionBack Panel Back panel of the 4350E contains the following connectionsPhysical Installation Required Tools and MaterialsDesktop Installation Wall-Mount InstallationRack-Mount Installation Administration Connecting the Power and CablesGetting Started Page Configuring the V2IU Configuration Guide For IP Centrex Applications Configuration Outline Task Subtask Application?Configuration Guide For Station Side IP PBX Applications Configure For Station Configuration Guide For Trunk Side IP PBX Applications Configure For Trunk Side IP Configuration Guide For Hosted Video Applications HotspotConfigure For Hosted Configuration Guide For Enterprise Video Applications Configure For Hosted System Configuration Configure the LAN InterfacePress Submit Page Modify an Existing Vlan Configuration Configure the WAN Interface Configuring the V2IU Frame Relay Mode and Dlci Configure the Dhcp Server Mask Delete a Dhcp IP Address Configure Hostname, Snmp and Remote Logging Disable Snmp Change the Administration Password Read-only User Enabling a Read-only UserHow Subinterfaces Works Click SubmitConfiguring Subinterfaces How the ToS Byte Setting Works Viewing or Changing the ToS Byte SettingConfiguring the V2IU Configuration Configuring the V2IU Settings in the Embedded gatekeeper mode settings This is an advanced configuration option and should H.323 Settings page includes the following two buttons Activity Alias ManipulationItem Description Neighboring H.323 Neighboring page includes the following buttons Regular Expressions Symbol Description Regular ExpressionsForwarding Rules How Forwarding Rules WorksConfiguring Forwarding Rules Page Peering Proxy How Peering Proxy WorksPage Outbound from Site C to Site a Inbound from Site a to Site C Configuring Peering Proxy Outbound from Site C to Public IP EndpointAdding an H.323 Prefix Entry Clients List Lock To configure clients list lock, use the following steps Enabling the Clients List LockActivity Monitor Type of Events Callee admission request received Call Termination Viewing the H.323 Activity Monitor Received invalid dataVoIP Configuration Configure the VoIP ALG Programmed in your IP phone Configure VoIP Subnet Routing Enter a VoIP Subnet Route Configure IP Phones, IADs or Softphones Data Networking Configuration NAT for Data TrafficProtocolPublicIPAddress/netmask-portPrivateIPAddress-port Static IP routing Firewall Configuration Enable or disable the firewall Action Description Input format Traffic Management Configuration Enable Traffic Shaping Optionally enable priority IP addresses Enable CACCloser Look at Traffic Management Classifying Upstream Traffic ManagementDownstream Traffic Management Page System Diagnostics Viewing the ALG registration code Viewing Networking InformationRouting Information Viewing Advanced System Information Accessing Troubleshooting Tools Passive Voice Call MonitoringVerify Registered Voice and Video Devices Performing a Ping Test Restarting Networking Processes Saving and Restoring the V2IU 4350 Configuration Ewn CommandCreate a Backup File and Save in Local Flash Copy a Backup File to a Remote Tftp ServerDownload a Backup File from a Remote Tftp Server List the Available Backup FilesDelete a Backup File Page Upgrade Procedure for Software Revision 1.3.11 or Later Upgrading the V2IUPage Troubleshooting Tips AppendixSpecifications Regulatory Notices Other Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Page Regulatory Notices Page Regulatory Notices FCC Part 68 Notice to Users of Digital Service Industry Canada IC Notice Warranty and Repair Service Center