Polycom V2IU 4350 user manual Delete a Dhcp IP Address

Page 39

Configuring the V2IU 4350

Note	If you are not using WINS leave this field blank.

The Windows Internal Naming Service (WINS) is a service that keeps a database of computer name-to-IP address mappings so that computer names used in Windows environments can be mapped to IP addresses. The WINS Address is the IP address of the WINS server in your network. This value will be delivered to clients.

1.Enter the TFTP/FTP Server Name (DHCP user option 66).

Some IP phones use this setting to locate the TFTP or FTP servers which contain the phone software image used during boot. By default this option is the same as the TFTP server on the VoIP ALG page.

2.Primary and Secondary DNS

The primary and secondary DNS values come from those set under the WAN interface configuration, see Configure the WAN interface. These values will be delivered to clients.

3.Default Gateway

The default gateway is automatically set to the 4350’s LAN address, see Configure the LAN interface. This value will be delivered to clients.

4.Press Submit.

Delete a DHCP IP Address

1.Select DHCP Server.

2.To delete an IP address or a range of IP addresses highlight an entry or range of entries in the DHCP IP Addresses list and press the Delete key on your keyboard.

3.Press Submit.

Disable The DHCP Server

4.Select DHCP Server.

5.Uncheck\ the Enable DHCP Server checkbox.

6.Press Submit.

3 - 21

Image 39

Contents V2IU 4350 Converged Network Appliance Trademark Information Contents Page Contents System Diagnostics Saving and Restoring the V2IU 4350 ConfigurationUpgrading the V2IU 4350 Contents Page V2IU 4350 Converged Network Appliance T1 Wide Area Network WAN Access RouterFeature Summary LED Label Activity Description Front Panel LEDsBack panel of the 4350E contains the following connections Back PanelRequired Tools and Materials Physical InstallationWall-Mount Installation Desktop InstallationRack-Mount Installation Connecting the Power and Cables AdministrationGetting Started Page Configuring the V2IU Configuration Guide For IP Centrex Applications Task Subtask Application? Configuration OutlineConfiguration Guide For Station Side IP PBX Applications Configure For Station Configuration Guide For Trunk Side IP PBX Applications Configure For Trunk Side IP Hotspot Configuration Guide For Hosted Video ApplicationsConfigure For Hosted Configuration Guide For Enterprise Video Applications Configure For Hosted Configure the LAN Interface System ConfigurationPress Submit Page Modify an Existing Vlan Configuration Configure the WAN Interface Configuring the V2IU Frame Relay Mode and Dlci Configure the Dhcp Server Mask Delete a Dhcp IP Address Configure Hostname, Snmp and Remote Logging Disable Snmp Change the Administration Password Enabling a Read-only User Read-only UserClick Submit How Subinterfaces WorksConfiguring Subinterfaces Viewing or Changing the ToS Byte Setting How the ToS Byte Setting WorksConfiguring the V2IU Configuration Configuring the V2IU Settings in the Embedded gatekeeper mode settings This is an advanced configuration option and should H.323 Settings page includes the following two buttons Alias Manipulation ActivityItem Description Neighboring H.323 Neighboring page includes the following buttons Regular Expressions Regular Expressions Symbol DescriptionHow Forwarding Rules Works Forwarding RulesConfiguring Forwarding Rules Page How Peering Proxy Works Peering ProxyPage Outbound from Site C to Site a Inbound from Site a to Site C Outbound from Site C to Public IP Endpoint Configuring Peering ProxyAdding an H.323 Prefix Entry Clients List Lock Enabling the Clients List Lock To configure clients list lock, use the following stepsActivity Monitor Type of Events Callee admission request received Call Termination Received invalid data Viewing the H.323 Activity MonitorVoIP Configuration Configure the VoIP ALG Programmed in your IP phone Configure VoIP Subnet Routing Enter a VoIP Subnet Route Configure IP Phones, IADs or Softphones NAT for Data Traffic Data Networking ConfigurationProtocolPublicIPAddress/netmask-portPrivateIPAddress-port Static IP routing Firewall Configuration Enable or disable the firewall Action Description Input format Traffic Management Configuration Enable Traffic Shaping Enable CAC Optionally enable priority IP addressesCloser Look at Traffic Management Upstream Traffic Management ClassifyingDownstream Traffic Management Page System Diagnostics Viewing Networking Information Viewing the ALG registration codeRouting Information Viewing Advanced System Information Passive Voice Call Monitoring Accessing Troubleshooting ToolsVerify Registered Voice and Video Devices Performing a Ping Test Restarting Networking Processes Ewn Command Saving and Restoring the V2IU 4350 ConfigurationList the Available Backup Files Create a Backup File and Save in Local FlashCopy a Backup File to a Remote Tftp Server Download a Backup File from a Remote Tftp ServerDelete a Backup File Page Upgrading the V2IU Upgrade Procedure for Software Revision 1.3.11 or LaterPage Appendix Troubleshooting TipsSpecifications Regulatory Notices Other Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Page Regulatory Notices Page Regulatory Notices FCC Part 68 Notice to Users of Digital Service Industry Canada IC Notice Warranty and Repair Service Center