Polycom V2IU 4350 user manual System Configuration, Configure the LAN Interface

Page 30

User Manual V2IU 4350 Converged Network Appliance

System Configuration

This section explains how to configure the 4350 to function in your IP network. You will configure the T1/E1 WAN interface, Ethernet interfaces, network addresses, DNS settings, default gateway, SNMP settings and change the administrative password.

1.Physically connect to the 4350 as described in Administration of the 4350 on page 2-4.

A browser-based configuration GUI should appear, as shown here.

2.Select the Network entry in the Configuration Menu.

Configure the LAN Interface

The 4350 provides an integrated 4 port 10/100 Mbps ethernet switch that can be optionally configured to support 802.1q VLANs. Integrated VLAN support simplifies the integration of the 4350 with existing VLAN-based networks. The 4350 is able to receive 802.1q-tagged packets from a downstream VLAN switch and appropriately route and process them per its firewall rules. Packets received from the WAN are placed in the appropriate VLAN based on IP address routing.

By default VLANs are not enabled and a single IP address is used for all 4 ethernet ports. The configuration of this address is as follows:

1.Enter the IP Address.

2.Enter the Subnet Mask (e.g. 255.255.255.0).

3 - 12

Image 30

Contents V2IU 4350 Converged Network Appliance Trademark Information Contents Page Contents System Diagnostics Saving and Restoring the V2IU 4350 ConfigurationUpgrading the V2IU 4350 Contents Page T1 Wide Area Network WAN Access Router V2IU 4350 Converged Network ApplianceFeature Summary Front Panel LEDs LED Label Activity DescriptionBack Panel Back panel of the 4350E contains the following connectionsPhysical Installation Required Tools and MaterialsDesktop Installation Wall-Mount InstallationRack-Mount Installation Administration Connecting the Power and CablesGetting Started Page Configuring the V2IU Configuration Guide For IP Centrex Applications Configuration Outline Task Subtask Application?Configuration Guide For Station Side IP PBX Applications Configure For Station Configuration Guide For Trunk Side IP PBX Applications Configure For Trunk Side IP Configuration Guide For Hosted Video Applications Hotspot Configure For Hosted Configuration Guide For Enterprise Video Applications Configure For Hosted System Configuration Configure the LAN InterfacePress Submit Page Modify an Existing Vlan Configuration Configure the WAN Interface Configuring the V2IU Frame Relay Mode and Dlci Configure the Dhcp Server Mask Delete a Dhcp IP Address Configure Hostname, Snmp and Remote Logging Disable Snmp Change the Administration Password Read-only User Enabling a Read-only UserHow Subinterfaces Works Click SubmitConfiguring Subinterfaces How the ToS Byte Setting Works Viewing or Changing the ToS Byte SettingConfiguring the V2IU Configuration Configuring the V2IU Settings in the Embedded gatekeeper mode settings This is an advanced configuration option and should H.323 Settings page includes the following two buttons Activity Alias ManipulationItem Description Neighboring H.323 Neighboring page includes the following buttons Regular Expressions Symbol Description Regular ExpressionsForwarding Rules How Forwarding Rules WorksConfiguring Forwarding Rules Page Peering Proxy How Peering Proxy WorksPage Outbound from Site C to Site a Inbound from Site a to Site C Configuring Peering Proxy Outbound from Site C to Public IP EndpointAdding an H.323 Prefix Entry Clients List Lock To configure clients list lock, use the following steps Enabling the Clients List LockActivity Monitor Type of Events Callee admission request received Call Termination Viewing the H.323 Activity Monitor Received invalid dataVoIP Configuration Configure the VoIP ALG Programmed in your IP phone Configure VoIP Subnet Routing Enter a VoIP Subnet Route Configure IP Phones, IADs or Softphones Data Networking Configuration NAT for Data TrafficProtocolPublicIPAddress/netmask-portPrivateIPAddress-port Static IP routing Firewall Configuration Enable or disable the firewall Action Description Input format Traffic Management Configuration Enable Traffic Shaping Optionally enable priority IP addresses Enable CACCloser Look at Traffic Management Classifying Upstream Traffic ManagementDownstream Traffic Management Page System Diagnostics Viewing the ALG registration code Viewing Networking InformationRouting Information Viewing Advanced System Information Accessing Troubleshooting Tools Passive Voice Call MonitoringVerify Registered Voice and Video Devices Performing a Ping Test Restarting Networking Processes Saving and Restoring the V2IU 4350 Configuration Ewn CommandDownload a Backup File from a Remote Tftp Server Create a Backup File and Save in Local FlashCopy a Backup File to a Remote Tftp Server List the Available Backup FilesDelete a Backup File Page Upgrade Procedure for Software Revision 1.3.11 or Later Upgrading the V2IUPage Troubleshooting Tips AppendixSpecifications Regulatory Notices Other Rights and Limitations Regulatory Notices Warranty and Warranty Exclusions Regulatory Notices Page Regulatory Notices Page Regulatory Notices FCC Part 68 Notice to Users of Digital Service Industry Canada IC Notice Warranty and Repair Service Center