Table 7. continued - Remote status messages (“S” codes)
S Code | Digit(s) And Switch Equivalent | Value (1) | Description |
S02 | B 0 0 0 0 0 0 0 0 | xxx00 | Both Busses Disabled – Mode Undefined |
| - - - ↑ ↑ ↑ ↑ ↑ | 00001 | |
| APPLICATION CONFIGURATION STATUS | 00010 | |
|
| 00011 | D&I Broadcast Mode |
|
| 00101 | |
|
| 00110 | |
|
| 00111 | D&I NMS Mode |
|
| 01001 | |
|
| 01010 | |
|
| 01011 | D&I Master |
|
| 01101 | D&I Slave - Master is in direction A |
|
| 01110 | D&I Slave - Master is in direction B |
|
| 10001 | End Slave - Master is in direction A |
|
| 10010 | Slave End - Master is in direction B |
|
| 10011 | Mode is undefined |
|
| 01111 | Mode is undefined |
|
| 101xx | Mode is undefined |
|
| 11xxx | Mode is undefined |
| CM ADDRESSING SUPPORT | 000xx | CM Addressing Not Supported |
|
| 010xx | CM Addressing Not Supported |
|
| 011xx | CM Addressing Not Supported |
|
| 001xx | CM Addressing Is Supported |
| PORT 1 APPLICATION STATUS | 000xx | Port 1 is Broadcast Port |
|
| 001xx | Port 1 is Local User Port (Use |
|
| 010xx | Port 1 is Master Port |
|
| 011xx | Port 1 is a Slave Port |
|
| 100xx | Port 1 is a Slave Port |
|
| 101xx | Port 1 is Undefined |
|
| 11xxx | Port 1 is Undefined |
| PORT 2 APPLICATION STATUS | 000xx | Port 2 is Broadcast Port (If Available) |
|
| 001xx | Port 2 is CM Port (Use |
|
| 010xx | Port 2 is Slave of Port 1 Master (If Available) |
|
| 011xx | Port 2 is a Slave Port (If Available) |
|
| 100xx | Port 2 is a Slave Port (If Available) |
|
| 101xx | Port 2 is Undefined |
|
| 11xxx | Port 2 is Undefined |
| B 0 0 0 0 0 0 0 0 | … | Not used |
| ↑ ↑ ↑ - - - - - |
|
|
|
|
|
|
>> table continues on next page <<
RFL NCM |
| RFL Electronics Inc. |
November 6, 2007 | 48 | (973) |