Fisher-Price J2457 manual Problems & Solutions, Problem Solution

Problems & Solutions

	Problem	Solution
You hear static or buzzing		There may be a physical obstruction or noise level causing
		interference. Change the location of reciever or try a
		different channel. Range varies depending on surrounding
		conditions such as noise levels, physical obstructions
		and signal interference.
Reception display on receiver(s) LCD screen		Transmitter power is off. Turn transmitter power on.
flashes and you hear a low pitched beep
		Transmitter and receiver(s) are on different channels.
		Change all units to the same channel.
		Loose power cord connection and transmitter power is off.
		Check transmitter power cord plug-to-outlet connection.
		No power to wall outlet and transmitter power is off.
		Make sure light switch that controls power flow to wall
		outlet is on.
		Power is off because circuit breaker for room is off.
		Make sure house fuses and circuit breakers are on.
Receiver(s) LCD screen does not turn on		Receiver power is off. Turn receiver power on.
		Battery needs to be recharged. Charge the battery for 8
		hours. Or, use the AC adaptor as a power source (and
		charge the battery at the same time!).
		Power is off because circuit breaker for room is off.
		Make sure house fuses and circuit breakers are on.
		No power to wall outlet and power is off. Make sure light
		switch that controls power flow to wall outlet is on.
Receiver(s) LCD screen indicates low battery		Battery needs to be recharged. Charge the battery for 8
power	and you hear a high pitched beep	hours. Or, use the AC adaptor as a power source (and
		charge the battery at the same time!).
Transmitter power indicator does not light		Transmitter power is off. Turn transmitter power on.
		Loose power cord connection and transmitter power is off.
		Check transmitter power cord plug-to-outlet connection.
		No power to wall outlet and transmitter power is off.
		Make sure light switch that controls power flow to wall
		outlet is on.
		Power is off because circuit breaker for baby’s room is off.
		Make sure house fuses and circuit breakers are on.
You can hear conversations or sounds		There is signal interference due to other nursery monitors
from other homes		on same channel or cordless telephone use. Change the
		channel on all units.

Hint: If, after checking all of these solutions, you believe that your transmitter power cord or AC adaptor(s) are damaged, please contact Fisher-Price®.

13