![](/images/new-backgrounds/1129174/12917437x1.webp)
|
| ENGLISH 19 |
Problem | Possible cause | Solution |
|
|
|
The shaver does not | The shaving heads are damaged | Replace the shaving heads (see chapter |
shave as well as it used | or worn. | ‘Replacement’). |
to. |
|
|
| Foam or gel residues clog up |
| the shaving heads. |
| Long hairs obstruct the shaving |
| heads. |
| You have not inserted the |
| shaving heads properly. |
The shaver does not | The rechargeable battery is |
work when I press the | empty. |
on/off button. |
|
| The temperature of the shaver |
| is too high. In this case, the |
| shaver does not work. |
The shaver does not | The shaver is not designed to |
work, although it is | be used directly from the mains. |
connected to the |
|
mains. |
|
Rinse the shaving unit under a hot tap (see chapter ‘Cleaning and maintenance’).
Clean the shaving heads one by one (see chapter ‘Cleaning and maintenance’).
Make sure that the projections of the shaving heads fit exactly into the recesses (see chapter ‘Cleaning and maintenance’).
Recharge the battery (see chapter ‘Charging’).
As soon as the temperature of the shaver has dropped sufficiently, you can switch on the shaver again.
Recharge the battery (see chapter ‘Charging’) and disconnect it from the mains.