Chariot Carriers Comfort, CX manual Fixing the Weber hitches on the bicycle

Page 19

Attaching the trailer (identical for quick

Pull the hitch ball to the end of the

Push the securing pin from the top

release axle and solid axle): Insert the

hitch cup.

through both holes of the aluminium cup

hitch ball, which is attached to the

 

and secure the pin by pulling the hole of

hitch arm, from the front into the alumi-

 

the elastic ribbon over the protruding

nium hitch cup.

 

end of the pin.

Safety Recommendation:

Always attach the safety strap to the chain stay!

Put the safety strap around the bicycle chain stay and attach the safety clip to the D-ring of the hitch arm

Warnings regarding both Chariot hitches:

When turning round or manoeuvring the outfit, the angle between the towing bicycle and the trailer must not exceed 90°, otherwise the hitch ball could be damaged (overstretched).

2.3.3 Fixing the Weber hitches on the bicycle

Please read carefully the comprehensive manufacturer’s instructions which are supplied by Weber with the hitch with adjustable kickstand (Weber B) and with the Weber hitch for rear-axle attachment (Weber E).

2.4Rear Battery Lights (Accessory, not supplied as standard)

In the upper area of the rear cover there is a sewn-on webbing strap on the right and on the left for attaching rear battery lights. When using the trailer in the dark, an additional rear light is required by law. If only one battery light is attached, it needs to be on the left hand side in direction of travel (in countries where the traf- fic drives on the left the battery light must be attached to the webbing strap on the right hand side). Flashing lights are prohibited in some countries, e.g. in Germany.

Note:

Please ensure when buying lights that they conform to the appropriate legal requirements of the country they are used in and also bear an approval mark (e.g. K-mark in Germany).

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Cabriolet Corsaire XL Comfort Captain XL Cheetah Cougar Table of contents Congratulations on buying this child transporter Maintenance, Care and Storage of the Chariot CTSAssembling the Basic Unit Basic UnitPage Wheel assembly plastic wheels on the Cabriolet and Comfort Fitting the handlebar for all models except CX Safety RecommendationFitting the handlebar on the model CX Functions of the Basic Unit Seat and safety beltTipp Climate control in the basic unit Tip Parking brake of the Cheetah, Cougar and CX Parking brakeSetting the stiffness of the springs Adjustable suspension on the Cougar and CXPlease note Folding the Cabriolet, Corsaire XL, Comfort and Captain XL Folding the Basic UnitFolding the Cheetah, Cougar and CX Special Functions of the model CX Bicycle Kit Fitting the Reflectors and Safety Flag Fixing the Hitch Arm on the Base all types of hitch arms Safety noteFixing the Hitch Arm on the Bicycle Detaching the coupling Fixing the hitch arm with Chariot axle hitch on the bicycleFixing the Weber hitches on the bicycle Safety Instructions for the Bicycle Trailer Fitting the Jogging Kit Jogging KitSafety Instructions for the Jogging Stroller Fitting the Buggy Kit Buggy KitSafety Instructions for the Buggy Hiking Kit Safety Instructions for the Hiking KitFitting the Hiking Kit Fitting the Skiing Kit Skiing KitSafety Instructions for the Skiing Kit Walking Kit Safety Instructions for the Walking KitFitting the Walking Kit Maintenance, Care and Storage of the Chariot CTS General Safety InstructionsGeneral Maintenance WarrantyInfluences on wear and tear PartsDate of issue
Top Page Image Contents