6. The Skiing Kit
(for the Corsaire XL, Cheetah, Cougar and CX ):
The assembled sleigh hiker (base + skiing kit) – example Cougar1
6.1 Fitting the Skiing Kit:
Parts supplied:
Skier and drawbar with waist strap
Fitting the skiing kit: Firstly, remove the wheel by pressing on the axle knob.
Slide the drawbar into the drawbar attachment bracket.
Insert the skier into the hollow axle while depressing the axle knob and ensure that the axle safely engages.
Once the holes of the attachment brak- ket and the drawbar are aligned with each other push the securing pin from below through bracket and drawbar and lock it by pushing the clip over the pin.
The drawbar is adjustable for three lengths. Pull out the inner tube and insert the securing pin when the holes of inner and outer tube are aligned with each other.
26